ASYNCHRONOUS TRANSFER MODE (ATM) CONVERSION DEVICE (ACD)

International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, NevadaThe Asynchronous Transfer Mode (ATM) Conversion Device (ACD) System is based on state-of-the-art ATM technology. The system interfaces between high-rate ECL/RS-422 raw data bitstreams and Synchronous Optical Network (SONET) OC-3 fiber. The SONET OC-3 interface uses ATM Adaptation Layer Type Five (AAL5) format. The system exceeds its 50 Mbps raw data, single stream requirement and provides single stream raw data throughput at rates up to 75 Mbps. With ATM and SONET packaging overhead, this translates into 90 Mbps on the OC-3 fiber. In addition to high-rate throughput, the system provides multiplexing and demultiplexing of multiple stream throughput based on the ATM cell header Virtual Path and Virtual Channel Identifier (VPI/VCI) values. The system is designed with the flexibility to provide between three and six throughput channels. All of which are multiplexed/demultiplexed to and from the same OC-3 interface. Multiple stream cumulative raw data throughput rates of up to 80 Mbps, or 96 Mbps on the fiber, have successfully run.International Foundation for TelemeteringProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection