A computer program developed for the automatic estimation of hydraulic parameters of an unconfined aquifer is presented. The program is based on Neuman's (1974) analytical solution for flow to a partially penetrating well in an unconfined aquifer. The parameters of this solution are estimated by a nonlinear least squares procedure. The program was tested on data generated synthetically, and on data from two pumping tests performed in Ohio and Colorado. The estimated hydraulic parameters led to a good reproduction of observed aquifer behavior.hydrology collectio
Simulation of behavior of aquifers into determining groundwater exploitation rate and planning for s...
Due to the character of the original source materials and the nature of batch digitization, quality ...
A mathematical model is presented for identification of the parameter (S/T) in a two-dimensional, li...
A method is presented for identification of parameters in unconfined aquifers from pumping tests, ba...
A method is presented for identification of parameters in unconfined aquifers from pumping tests, ba...
An accurate estimation of aquifer hydraulic parameters is required for groundwater modeling and prop...
The problem of evaluating the parameters of the mathematical model of an unconfined aquifer is exami...
The problem of evaluating the parameters of the mathematical model of an unconfined aquifer is exami...
AbstractThe estimation of groundwater flow parameters from head measurements and other ancillary dat...
Abstract: Slug tests offer an efficient method for estimating the hydraulic parameters of an aquifer...
Not AvailableAquifer characteristics of different hydrogeological formations are evaluated for deter...
Analysis of pumping test data to estimate aquifer parameters is normally carried out using standard ...
Nowadays, optimization techniques such as Genetic Algorithms (GA) have attracted wide attention amon...
The estimation of aquifer parameters is often difficult, inaccurate and time consuming. A method of ...
Analysis of pumping test data to estimate aquifer parameters is normally carried out using stan-dard...
Simulation of behavior of aquifers into determining groundwater exploitation rate and planning for s...
Due to the character of the original source materials and the nature of batch digitization, quality ...
A mathematical model is presented for identification of the parameter (S/T) in a two-dimensional, li...
A method is presented for identification of parameters in unconfined aquifers from pumping tests, ba...
A method is presented for identification of parameters in unconfined aquifers from pumping tests, ba...
An accurate estimation of aquifer hydraulic parameters is required for groundwater modeling and prop...
The problem of evaluating the parameters of the mathematical model of an unconfined aquifer is exami...
The problem of evaluating the parameters of the mathematical model of an unconfined aquifer is exami...
AbstractThe estimation of groundwater flow parameters from head measurements and other ancillary dat...
Abstract: Slug tests offer an efficient method for estimating the hydraulic parameters of an aquifer...
Not AvailableAquifer characteristics of different hydrogeological formations are evaluated for deter...
Analysis of pumping test data to estimate aquifer parameters is normally carried out using standard ...
Nowadays, optimization techniques such as Genetic Algorithms (GA) have attracted wide attention amon...
The estimation of aquifer parameters is often difficult, inaccurate and time consuming. A method of ...
Analysis of pumping test data to estimate aquifer parameters is normally carried out using stan-dard...
Simulation of behavior of aquifers into determining groundwater exploitation rate and planning for s...
Due to the character of the original source materials and the nature of batch digitization, quality ...
A mathematical model is presented for identification of the parameter (S/T) in a two-dimensional, li...