Study of proton radiation effect to row hammer fault in DDR4 SDRAMs

This paper shares the effects of row hammer fault through high-energy proton radiation. The significance of row hammer fault is highlighted in terms of two different technologies in DDR4 SDRAM. Row hammer stress prevents nearby storage cells from maintaining storage data within the retention time of 64-ms. The stress is worsened by the radiation damage in silicon due to the high-energy particles. Proton-based radiation damage tests were performed with DDR4 SDRAM components from two different technologies. Experiment results showed that after proton irradiation, the number of bit errors caused by the row hammering test increased about 41% and 66% in technologies 2x-nm and 2y-nm, respectively. With 2y-nm technology, bit errors started to appear from 5 K Number of Hammering (N-HMR)- the equivalent of 500-mu s retention time. For 2y-nm components, more than 90% of failed words had multiple failed cells, which could not be corrected by Single Error Correction and Double Error Detection (SEC-DED) codes.This research was supported by MOTIE (Ministry of Trade, Industry & Energy) (10052875) and the KSRC (Korea Semiconductor Research Consortium) support program for the development of future semiconductor devices, and was also supported in part, by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning (2017R1A2B2002325)