Influence of environmental parameters on the seismic velocity changes in a clayey mudflow (Pont-Bourquin Landslide, Switzerland)

International audienceAn earthflow/mudflow of a few thousand cubic metres occurred at the toe of the Pont-Bourquin Landslide (PBL, Swiss Alps) in late August 2010. This event was preceded by a drop of about 6% in surface wave velocity (dV/V) determined from ambient vibration records. A seismic monitoring system made of three pairs of sensors was re-installed across the transportation and accumulation zones of the landslide in October 2011, allowing daily relative changes in seismic velocity to be measured for a period of 4.5 years. No similar drop in dV/V was observed during this period, consistently with the lack of significant landslide acceleration or earthflow/mudflow events. However, the three dV/V time series showed periodic and reversible variations in a range − 2% to 2%, suggesting a probable influence of seasonal parameters. They were cross-correlated to daily environmental (temperature and rainfall) and surface displacement time series. In the long term (yearly scale), dV/V variations are mainly driven by the temperature with short delays (30 to 50 days) indicating that the shallow layer (first 2 m) controls the dV/V variations. In the short term, the landslide response to precipitations exhibits a small decrease in dV/V with a delay of 2 to 5 days, in contrast with the displacement rate that almost instantaneously responds to the rainfall. The continuous seismic monitoring of PBL using ambient vibrations has proved to be a robust method for getting information at depth, with no data gap even during winters. The seasonal reversible seismic velocity variations turned out to be in a range lower than the drop observed before the August 2010 earthflow/mudflow, highlighting the interest of incorporating the dV/V technique in monitoring systems