Electrochemical corrosion behaviours of five Fe68Ni13-xMoxSi2B16 glasses with x = 0, 1, 2, 3 and 4 have been investigated in both 1 N HCl and 1 N H2SO4 solutions using potentiodynamic polarization and a.c. impedance spectroscopic techniques. The polarization and impedance results show that all the alloys possess inferior corrosion resistance which has been attributed to the low Ni content on one hand and the absence of passivators such as Cr and P on the other. Interestingly the alloys have been found to show weak passivation in more aggressive HCl and not in relatively mild H2SO4 solution. This has been explained in terms of dual behaviours of Mo in HCl and H2SO4 based on impedance data and literature work. The present study attempts to co...
Microstructural control through heat treatments is one of the most important means of designing allo...
The corrosion and passivation of Type 304 SS and of the amorphous alloys Fe-10Cr-13B-7C and -13P-7B,...
Paper presents the results on the corrosion behavior of some Al-Fe-Si, Al-Mg-Si and Al-Mg-Mn alloys ...
Fe-Cr-based metallic glasses (MGs) have attracted extensive attention for industrial applications du...
ABSTRACT. In order to develop alloy resistance in aggressive sulphat ion, the corrosion behavior of ...
Resistivity and passivation behavior of two Ni-base bulk metallic glasses, with the nominal composit...
Corrosion studies were carried out on two multicomponent iron based metallic glasses, Fe81B13.5Si3.5...
The structural characterization and the electrochemical behaviour of a series of iron-based amorphou...
The electrochemical behavior of the oxide layers on two metal-metal glassy alloys, Fe78Co9Cr10Mo2Al1...
The effect of H2SO4 acid concentration in range (1.0-12.0) M on corrosion resistance and ability of...
One of the interests in amorphous alloys is their excellent corrosion resistance. As part of an ongo...
Metallic glasses are multi-component metallic alloys with disordered atomic distribution unlike the...
Anodic behavior of Fe-Ni base glasses with B, Si, or P has been studied in buffered solutions, pH ra...
The corrosion and passivation of Type 304 SS and of the amorphous alloys Fe-10Cr-13B-7C and -13P-7B,...
The corrosion performance of a Nickel-free Fe-based bulk metallic glass (BMG). Fe(41)Co(7)Cr(15)Mo(1...
Microstructural control through heat treatments is one of the most important means of designing allo...
The corrosion and passivation of Type 304 SS and of the amorphous alloys Fe-10Cr-13B-7C and -13P-7B,...
Paper presents the results on the corrosion behavior of some Al-Fe-Si, Al-Mg-Si and Al-Mg-Mn alloys ...
Fe-Cr-based metallic glasses (MGs) have attracted extensive attention for industrial applications du...
ABSTRACT. In order to develop alloy resistance in aggressive sulphat ion, the corrosion behavior of ...
Resistivity and passivation behavior of two Ni-base bulk metallic glasses, with the nominal composit...
Corrosion studies were carried out on two multicomponent iron based metallic glasses, Fe81B13.5Si3.5...
The structural characterization and the electrochemical behaviour of a series of iron-based amorphou...
The electrochemical behavior of the oxide layers on two metal-metal glassy alloys, Fe78Co9Cr10Mo2Al1...
The effect of H2SO4 acid concentration in range (1.0-12.0) M on corrosion resistance and ability of...
One of the interests in amorphous alloys is their excellent corrosion resistance. As part of an ongo...
Metallic glasses are multi-component metallic alloys with disordered atomic distribution unlike the...
Anodic behavior of Fe-Ni base glasses with B, Si, or P has been studied in buffered solutions, pH ra...
The corrosion and passivation of Type 304 SS and of the amorphous alloys Fe-10Cr-13B-7C and -13P-7B,...
The corrosion performance of a Nickel-free Fe-based bulk metallic glass (BMG). Fe(41)Co(7)Cr(15)Mo(1...
Microstructural control through heat treatments is one of the most important means of designing allo...
The corrosion and passivation of Type 304 SS and of the amorphous alloys Fe-10Cr-13B-7C and -13P-7B,...
Paper presents the results on the corrosion behavior of some Al-Fe-Si, Al-Mg-Si and Al-Mg-Mn alloys ...