In the literature, the co-ordination of static VAr compensators (SVC) and power system stabilizers (PSS) using generator speed deviation or modal speeds such as stabilizing signals is shown to damp power system oscillations. Though such schemes are able to damp the SSR modes for small disturbances, they are unable to damp transient SSR due to large disturbances. In this report, an improvement in the control aspect of the SVC at the midpoint of the power transmission line is suggested. This scheme attempts different auxiliary signals that include line current, computed internal frequency and bus angle deviations. A system of configuration similar to IEEE First Bench Mark model is considered, eigenvalue analysis has been carried out and resul...
Power system oscillations occur due to the lack of damping torque at the generators rotors. The osci...
The coordinated control for SVC and generic/multi-band PSS for power swing damping is presented for ...
A study of the improvement in system dynamic stability through effective use of auxiliary control of...
In the literature, co-ordination of Static Var Compensator (SVC) and Power System Stabilizer (PSS) u...
This paper proposes a new auxiliary Subsynchronous Damping Controller (SSDC) for the Static Var Comp...
Static VAR System (SVS) is a kind of FACTS device which is used in power system primarily for the pu...
In today's practical power systems, the small-signal instability, mainly caused due to insufficient ...
This paper investigates the use of static var compensator (SVC) to stabilize multi-mode torsional os...
The Static Var Compensator (SVC) is used to improve the stability of the power system because of its...
The IEEE bench mark model 2 series compensated system is considered for analysis. It consists of sin...
Technical advantages of coordinating thyristor controlled static V Ar compensators (SVC) and power s...
The IEEE bench mark model 2 series compensated system is considered for analysis. It consists of sin...
A new concept is presented according to which a midpoint-located static VAR system ( S VS) with appr...
Increasingly complex modern power systems require stability, especially for transient and small dist...
Steady-state stability of power systems has long been one of the major concerns for all electric uti...
Power system oscillations occur due to the lack of damping torque at the generators rotors. The osci...
The coordinated control for SVC and generic/multi-band PSS for power swing damping is presented for ...
A study of the improvement in system dynamic stability through effective use of auxiliary control of...
In the literature, co-ordination of Static Var Compensator (SVC) and Power System Stabilizer (PSS) u...
This paper proposes a new auxiliary Subsynchronous Damping Controller (SSDC) for the Static Var Comp...
Static VAR System (SVS) is a kind of FACTS device which is used in power system primarily for the pu...
In today's practical power systems, the small-signal instability, mainly caused due to insufficient ...
This paper investigates the use of static var compensator (SVC) to stabilize multi-mode torsional os...
The Static Var Compensator (SVC) is used to improve the stability of the power system because of its...
The IEEE bench mark model 2 series compensated system is considered for analysis. It consists of sin...
Technical advantages of coordinating thyristor controlled static V Ar compensators (SVC) and power s...
The IEEE bench mark model 2 series compensated system is considered for analysis. It consists of sin...
A new concept is presented according to which a midpoint-located static VAR system ( S VS) with appr...
Increasingly complex modern power systems require stability, especially for transient and small dist...
Steady-state stability of power systems has long been one of the major concerns for all electric uti...
Power system oscillations occur due to the lack of damping torque at the generators rotors. The osci...
The coordinated control for SVC and generic/multi-band PSS for power swing damping is presented for ...
A study of the improvement in system dynamic stability through effective use of auxiliary control of...