Topics
Mossbauer SpectroscopyTopical concept
sputteringElection
Conversion Electron Mossbauer Spectroscopy (GEMS) studies were carried out on as deposited and annealed Fe/Ni multilayers prepared by rf sputtering, in order to probe the interface. A series of multilayers in which Ni layer thickness was fixed at 25 Angstrom and the Fe layer thickness was varied from 18 to 120 Angstrom, were studied. The width of the Mossbauer lines increases with decreasing Fe layer thickness indicating a mixing at the interface, which was analyzed using specific models
The formation of intermetallic phases influences the properties of commercial alloys. CEMS can be us...
Lucinski T, Kopcewicz M, Hütten A, et al. Magnetic and mossbauer study of Fe/Si multilayers. In: Jo...
The magnetic structure of Ni(1 1 1)/Fe/Ni trilayer was studied by Mossbauer spectroscopy. Two kinds ...
Ion beam induced atomic mixing at Fe-MO interface has been studied by using the technique of convers...
Ion beam induced atomic mixing and subsequent thermal reactions are studied in the single interface ...
Fe/Pd multilayers with different thicknesses of Pd layers prepared by e-beam evaporation have been s...
Metastable FeCu alloy films have been synthesized by ion beam induced atomic mixing at the Fe-Cu int...
Ion-beam-induced atomic mixing and the effect of thermally activated transformations at the Fe-Al in...
The interface states of [NiFe/Mo](30) and [Fe/Mo](30) multilayers have been investigated by x-ray sm...
The crucial point in the characterization of magnetic interfaces is the knowledge of the morphology ...
We have prepared Fe/Ta multilayers by rf sputtering. A small 1-cm2 chip of Fe-57 was placed on the F...
Kopcewicz M, Lucinski T, Stobiecki F, Reiss G. Mossbauer study of the influence of thermal treatment...
Conversion Electrons Mossbauer Spectroscopy (CEMS) is used to study the magnetic polarization state ...
Mössbauer spectroscopy has been used as a powerful tool to investigate the local properties of some ...
A Fe–Al(oxide)-bilayer was deposited on a thermally oxidized and Pd-buffered Si substrate. In order ...
The formation of intermetallic phases influences the properties of commercial alloys. CEMS can be us...
Lucinski T, Kopcewicz M, Hütten A, et al. Magnetic and mossbauer study of Fe/Si multilayers. In: Jo...
The magnetic structure of Ni(1 1 1)/Fe/Ni trilayer was studied by Mossbauer spectroscopy. Two kinds ...
Ion beam induced atomic mixing at Fe-MO interface has been studied by using the technique of convers...
Ion beam induced atomic mixing and subsequent thermal reactions are studied in the single interface ...
Fe/Pd multilayers with different thicknesses of Pd layers prepared by e-beam evaporation have been s...
Metastable FeCu alloy films have been synthesized by ion beam induced atomic mixing at the Fe-Cu int...
Ion-beam-induced atomic mixing and the effect of thermally activated transformations at the Fe-Al in...
The interface states of [NiFe/Mo](30) and [Fe/Mo](30) multilayers have been investigated by x-ray sm...
The crucial point in the characterization of magnetic interfaces is the knowledge of the morphology ...
We have prepared Fe/Ta multilayers by rf sputtering. A small 1-cm2 chip of Fe-57 was placed on the F...
Kopcewicz M, Lucinski T, Stobiecki F, Reiss G. Mossbauer study of the influence of thermal treatment...
Conversion Electrons Mossbauer Spectroscopy (CEMS) is used to study the magnetic polarization state ...
Mössbauer spectroscopy has been used as a powerful tool to investigate the local properties of some ...
A Fe–Al(oxide)-bilayer was deposited on a thermally oxidized and Pd-buffered Si substrate. In order ...
The formation of intermetallic phases influences the properties of commercial alloys. CEMS can be us...
Lucinski T, Kopcewicz M, Hütten A, et al. Magnetic and mossbauer study of Fe/Si multilayers. In: Jo...
The magnetic structure of Ni(1 1 1)/Fe/Ni trilayer was studied by Mossbauer spectroscopy. Two kinds ...
Add to ORKG