Solar selective coatings based on carbon:transition metal nanocomposites

The design of efficient and stable solar selective coatings for Concentrating Solar Power (CSP) central receivers requires a comprehensive knowledge about the incorporated materials. In this work solar selective coatings were grown by filtered cathodic vacuum arc (FCVA) deposition. The complete stacks consist of an infrared reflection layer, an absorber layer of C:ZrC nanocomposites and an antireflection layer. The Carbon-transition metal nanocomposites were studied as absorber materials because they show appropriate optical properties, i.e. high absorption in the solar region and low thermal emittance. Furthermore metal carbides are thermally and mechanically stabile in air at high temperatures. In order to optimize the absorber layer, the metal content was controlled by adjusting the pulse ratio between the two arc sources. The elemental composition of the absorber layers was determined by Ion Beam Analysis. X-Ray diffraction (XRD) measurements show the formation of metal carbides when the metal content is high enough. The optical properties of the deposited coatings were characterized by spectroscopic ellipsometry (SE). The reflectance spectra of the complete selective coating were simulated with the optical software CODE. Bruggeman effective medium approximation (EMA) was employed to average the dielectric functions of the two components which compose the nanocomposite in the absorber layer. Good agreement was found between simulated and measured reflectance spectra of the solar selective multilayer