TOLERANCE OF SHAPE AND POSITION OBTAINED BY TURNING ON THE COMPONENT IN PRODUCTION

Dopušteno odstupanje od nazivne mjere nazivamo tolerancijom. Sam utjecaj određivanje tolerancija može također imati veliku ulogu u cijeni i kvaliteti obrade. Razlikujemo tri vrste tolerancija: mjera, oblika i položaja koji je također definiran na najjednostavniji način u radu. U diplomskom radu opisan je najjednostavniji način postupak i proces obrade u proizvodnji. Analiziran je radni nalog Valmet gdje pokazuje kvalitetu i sam postupak obrade. Postupak obrade sastoji se od puštanja tehnologije i redoslijed operacija u proizvodnji. Da bi proizvod bio konačan potrebno je na kraju izvršiti kontrolu pomoćnu mjernih lista gdje utvrđujemo da je postupak u skladu s crtežima.Permissible deviation from the nominal measure is called tolerance. The influence itself of determining tolerance can also play a major role in the price and quality of processing. We differentiate between three types of tolerance: measure, shape, and position, which is also defined in the simplest way in the work. In diplomatic work the simplest method of processing and processing in the production is described. A Valmet work order was analyzed where it shows the quality and the processing itself. The processing process consists of the release of technology and sequence of operations in production. In order to make the product final, it is necessary to check the auxiliary metrics at the end where it is determined that the procedure is in accordance with the drawings