Thermo-Fluid Modelling for Gas Turbines - Part I: Theoretical Foundation and Uncertainty Analysis

In this two-part publication, various aspects of thermo-fluid modelling for gas turbines are described and their impact on performance calculations and emissions predictions at aircraft system level is assessed. Accurate and reliable fluid modelling is essential for any gas turbine performance simulation software as it provides a robust foundation for building advanced multi-disciplinary modelling capabilities. Caloric properties for generic and semi-generic gas turbine performance simulation codes can be calculated at various levels of fidelity; selection of the fidelity level is dependent upon the objectives of the simulation and execution time constraints. However, rigorous fluid modelling may not necessarily improve performance simulation accuracy unless all modelling assumptions and sources of uncertainty are aligned to the same level. Certain modelling aspects such as the introduction of chemical kinetics, and dissociation effects, may reduce computational speed and this is of significant importance for radical space exploration and novel propulsion cycle assessment. This paper describes and compares fluid models, based on different levels of fidelity, which have been developed for an industry standard gas turbine performance simulation code and an environmental assessment tool for novel propulsion cycles. The latter comprises the following modules: engine performance, aircraft performance, emissions prediction, and environmental impact. The work presented aims to fill the current literature gap by: (i) investigating the common assumptions made in thermo-fluid modelling for gas turbines and their effect on caloric properties and (ii) assessing the impact of uncertainties on performance calculations and emissions predictions at aircraft system level. In Part I of this two-part publication, a comprehensive analysis of thermo-fluid modelling for gas turbines is presented and the fluid models developed are discussed in detail. Common technical models, used for calculating caloric properties, are compared while typical assumptions made in fluid modelling, and the uncertainties induced, are examined. Several analyses, which demonstrate the effects of composition, temperature and pressure on caloric properties of working mediums for gas turbines, are presented. The working mediums examined include dry air and combustion products for various fuels and H/C ratios. The errors induced by ignoring dissociation effects are also discussed