Design and characterization of InP DHBT amplifiers in common-emitter and common-base topologies are presented. Both one-stage and multistage circuits are demonstrated. For one of the amplifiers, a peak gain of 24 dB at 255 GHz is measured, which is among the highest reported gains for HBT amplifiers above 200 GHz, and more than 10 dB gain at 210-315 GHz. The noise figure of this amplifier is measured on-wafer at 240-295 GHz, and it demonstrates a minimum noise figure of 10.4 dB at 265 GHz, which is the lowest reported noise figure for HBT amplifiers above 200 GHz
103 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2005.This work describes a modelin...
A 340 GHz integrated receiver based on a 250 nm InP DHBT technology is presented in this paper. It c...
A 340 GHz integrated receiver based on a 250 nm InP DHBT technology is presented in this paper. It c...
Design and characterization of InP DHBT amplifiers in common-emitter and common-base topologies are ...
In this paper, single-stage and multistage amplifiers of two different topologies, common-base with ...
In this paper, single-stage and multistage amplifiers of two different topologies, common-base with ...
This thesis treats the design and characterization of amplifiers operating up to submillimeter-wave ...
Three wideband amplifiers in double-heterojunction bipolar transistor technology have been designed ...
This paper presents a broadband amplifier MMIC based on 0.5 µm InP double-heterojunction bipolar tra...
Two wideband amplifier MMICs are designed and tested. Both designs employ InP double-heterojunction ...
Two wideband amplifier MMICs are designed and tested. Both designs employ InP double-heterojunction ...
This thesis treats the design and characterization of amplifiers operating up tosubmillimeter-wave f...
Three wideband amplifiers in double-heterojunction bipolar transistor technology have been designed ...
The performances of WR-3.4 monolithic amplifiers fabricated using dual-finger 6 µm InP HBT devices a...
103 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2005.This work describes a modelin...
103 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2005.This work describes a modelin...
A 340 GHz integrated receiver based on a 250 nm InP DHBT technology is presented in this paper. It c...
A 340 GHz integrated receiver based on a 250 nm InP DHBT technology is presented in this paper. It c...
Design and characterization of InP DHBT amplifiers in common-emitter and common-base topologies are ...
In this paper, single-stage and multistage amplifiers of two different topologies, common-base with ...
In this paper, single-stage and multistage amplifiers of two different topologies, common-base with ...
This thesis treats the design and characterization of amplifiers operating up to submillimeter-wave ...
Three wideband amplifiers in double-heterojunction bipolar transistor technology have been designed ...
This paper presents a broadband amplifier MMIC based on 0.5 µm InP double-heterojunction bipolar tra...
Two wideband amplifier MMICs are designed and tested. Both designs employ InP double-heterojunction ...
Two wideband amplifier MMICs are designed and tested. Both designs employ InP double-heterojunction ...
This thesis treats the design and characterization of amplifiers operating up tosubmillimeter-wave f...
Three wideband amplifiers in double-heterojunction bipolar transistor technology have been designed ...
The performances of WR-3.4 monolithic amplifiers fabricated using dual-finger 6 µm InP HBT devices a...
103 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2005.This work describes a modelin...
103 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 2005.This work describes a modelin...
A 340 GHz integrated receiver based on a 250 nm InP DHBT technology is presented in this paper. It c...
A 340 GHz integrated receiver based on a 250 nm InP DHBT technology is presented in this paper. It c...