Citrus Waste Biorefinery: Process Development, Simulation and Economic Analysis

The production of ethanol and other sustainable products including methane, limonene and pectin from citrus wastes (CWs) was studied in the present thesis. In the first part of the work, the CWs were hydrolyzed using enzymes – pectinase, cellulase and β-glucosidase – and the hydrolyzate was fermented using encapsulated yeasts in the presence of the inhibitor compound ‘limonene’. However, the application of encapsulated cells may be hampered by the high price of encapsulation, enzymes and the low stability of capsules’ membrane at high shear stresses.Therefore, a process based on dilute-acid hydrolysis of CWs was developed. The limonene of the CWs was effectively removed through flashing of the hydrolyzate into an expansion tank. The sugars present in the hydrolyzate were converted to ethanol using a flocculating yeast strain. Then ethanol was distilled and the stillage and the remaining solid materials of the hydrolyzed CWs were anaerobically digested to obtain methane. The soluble pectin content of hydrolyzate can be precipitated using the produced ethanol. One ton of CWs with 20% dry weight resulted in 39.64 l ethanol, 45 m3 methane, 8.9 l limonene, and 38.8 kg pectin. The feasibility of the process depends on the transportation cost and the capacity of CW. For example, the total cost of ethanol with a capacity of 100,000 tons CW/year was 0.91 USD/L, assuming 10 USD/ton handling and transportation cost of CW to the plant. Changing the plant capacity from 25,000 to 400,000 tons CW per year results in reducing ethanol costs from 2.55 to 0.46 USD/L in an economically feasible process. Since this process employs a flocculating yeast strain, the major concern in design of the bioreactor is the sedimentation of yeast flocs. The size of flocs is a function of sugar concentration, time and flow. A CFD model of bioreactor was developed to predict the sedimentation of flocs and the effect of flow on distribution of flocs. The CFD model predicted that the flocs sediment when they are larger than 180 micrometer. The developed CFD model can be used in design and scale-up of the bioreactor.For the plants with low CW capacity, a steam explosion process was employed to eliminate limonene and the treated CW was used in a digestion plant to produce methane. The required cost of this pretreatment was about 0.90 million dollars for 10,000 tons/year of CWs