The effects of helium ion irradiation on immiscible AlN/TiN multilayered system were studied. The structure consisted of 30 alternate AlN (similar to 8 nm) and TiN (similar to 9.3 nm) layers of a total thickness around 260 nm, deposited on (100) Si substrates by reactive sputtering. The system was then implanted with 30 keV He+ to very high irradiation doses, 1-4 x 10(17) ions/cm(2). Evaluated projected ion range was 153.1 +/- 45.4 nm and maximum displacements per atom for the applied doses from 6 to 24. It was found that the multilayers remained well separated and stable after irradiation to 1 x 10(17) ions/cm(2), which introduces up to 10 at.% of He within the structure. The main effects were agglomeration of He bubbles around the project...
A study is presented of the effect of 5 keV helium ion bombardment on thin (about 2000 Å) aluminium ...
The influence of microstructure and composition on the effects of ion irradiation in Al alloys was s...
Helium (He) bubbles are typical radiation defects in structural materials in nuclear reactors after ...
The effects of high dose Ar ion irradiation on immiscible AlN/TiN multilayered structures were studi...
A comparative study of the structural changes induced in Al/Ti and AlN/TiN multilayers by argon ion ...
Structural changes in multilayered AlN/TiN nanocomposites upon Ar(+) ion irradiation were investigat...
This paper reports on compositional and structural modifications induced in coated AlN/TiN multilaye...
We have compared the effects of 200 keV Ar-40(1+) ion implantation and 166 MeV Xe-132(27+) ion irrad...
This paper presents the results of a systematic study of helium swelling and the subsequent process ...
International audienceHe implantation was performed at RT and 550 °C into AlN epitaxial films. The r...
The evolution of individual He bubbles in thin Al foils during 200-keV Xe irradiation at room-temper...
A common goal for materials employed in nuclear environments is to exhibit the highest radiation tol...
This paper presents the results of a systematic study of helium swelling and the subsequent process ...
The article reports on radiation defect formation parameters and radiation resistance of multilayer ...
This study investigates the effects of He bubbles on structural and mechanical properties of sputter...
A study is presented of the effect of 5 keV helium ion bombardment on thin (about 2000 Å) aluminium ...
The influence of microstructure and composition on the effects of ion irradiation in Al alloys was s...
Helium (He) bubbles are typical radiation defects in structural materials in nuclear reactors after ...
The effects of high dose Ar ion irradiation on immiscible AlN/TiN multilayered structures were studi...
A comparative study of the structural changes induced in Al/Ti and AlN/TiN multilayers by argon ion ...
Structural changes in multilayered AlN/TiN nanocomposites upon Ar(+) ion irradiation were investigat...
This paper reports on compositional and structural modifications induced in coated AlN/TiN multilaye...
We have compared the effects of 200 keV Ar-40(1+) ion implantation and 166 MeV Xe-132(27+) ion irrad...
This paper presents the results of a systematic study of helium swelling and the subsequent process ...
International audienceHe implantation was performed at RT and 550 °C into AlN epitaxial films. The r...
The evolution of individual He bubbles in thin Al foils during 200-keV Xe irradiation at room-temper...
A common goal for materials employed in nuclear environments is to exhibit the highest radiation tol...
This paper presents the results of a systematic study of helium swelling and the subsequent process ...
The article reports on radiation defect formation parameters and radiation resistance of multilayer ...
This study investigates the effects of He bubbles on structural and mechanical properties of sputter...
A study is presented of the effect of 5 keV helium ion bombardment on thin (about 2000 Å) aluminium ...
The influence of microstructure and composition on the effects of ion irradiation in Al alloys was s...
Helium (He) bubbles are typical radiation defects in structural materials in nuclear reactors after ...