Add to ORKGData on mechanochemical synthesis of PbTiO3 from PbO and TiO2 without subsequent heating of activated mixtures are presented. Physical and chemical processes occurring during mechanical activation are followed by the X-ray diffraction (XRD) method, scanning electron microscope (SEM) analysis and measurement of BET specific surface area. It was shown that during vibro milling of 10 g oxide mixture, formation of PbTiO3 was ended after 60 min. The progression of the chemical reaction was detected by the XRD method and chemical analysis. (C) 1998 Elsevier Science S.A. All rights reserved
Our efforts were directed to the preparation of bismuth titanate - Bi 4e;Ti3O12 (BIT) by mechanicall...
Mechanochemistry is a method that can cover the energy demand of reaction pathways between solid mat...
In this study, we aimed to achieve mechanochemical perovskite synthesis and to quantify the energy u...
PbTiO3 powders have been prepared by mild annealing (2 h at 600◦C) of PbCO3:TiO2 mixtures previously...
Mechanochemical synthesis of BaTiO₃ from a powder mixture of BaCO₃ and TiO₂ was investigated. An att...
PZT ceramic powders were successfully prepared from the mixture of PbO, ZrO2 and TiO2 by mechanochem...
In this study, we aimed to achieve mechanochemical perovskite synthesis and to quantify the energy u...
PZT ceramic powders were successfully prepared from the mixture of PbO, ZrO2 and TiO2 by mechanochem...
Recently, mechanochemical synthesis was widely used in preparation of perovskite type of materials, ...
Recently, mechanochemical synthesis was widely used in preparation of perovskite type of materials, ...
A powder mixture of BaO and TiO2, was mechanochemically treated in a planetary ball mill in an air a...
The synthesis of calcium titanate, CaTiO3, was performed by mechanical activation and thermal treatm...
The synthesis of calcium titanate, CaTiO3, was performed by mechanical activation and thermal treatm...
In this study, a mixture of magnesium oxide and titanium dioxide was mechanically activated in order...
The mechanical activation is one of the most effective method for obtaining highly disperse system d...
Our efforts were directed to the preparation of bismuth titanate - Bi 4e;Ti3O12 (BIT) by mechanicall...
Mechanochemistry is a method that can cover the energy demand of reaction pathways between solid mat...
In this study, we aimed to achieve mechanochemical perovskite synthesis and to quantify the energy u...
PbTiO3 powders have been prepared by mild annealing (2 h at 600◦C) of PbCO3:TiO2 mixtures previously...
Mechanochemical synthesis of BaTiO₃ from a powder mixture of BaCO₃ and TiO₂ was investigated. An att...
PZT ceramic powders were successfully prepared from the mixture of PbO, ZrO2 and TiO2 by mechanochem...
In this study, we aimed to achieve mechanochemical perovskite synthesis and to quantify the energy u...
PZT ceramic powders were successfully prepared from the mixture of PbO, ZrO2 and TiO2 by mechanochem...
Recently, mechanochemical synthesis was widely used in preparation of perovskite type of materials, ...
Recently, mechanochemical synthesis was widely used in preparation of perovskite type of materials, ...
A powder mixture of BaO and TiO2, was mechanochemically treated in a planetary ball mill in an air a...
The synthesis of calcium titanate, CaTiO3, was performed by mechanical activation and thermal treatm...
The synthesis of calcium titanate, CaTiO3, was performed by mechanical activation and thermal treatm...
In this study, a mixture of magnesium oxide and titanium dioxide was mechanically activated in order...
The mechanical activation is one of the most effective method for obtaining highly disperse system d...
Our efforts were directed to the preparation of bismuth titanate - Bi 4e;Ti3O12 (BIT) by mechanicall...
Mechanochemistry is a method that can cover the energy demand of reaction pathways between solid mat...
In this study, we aimed to achieve mechanochemical perovskite synthesis and to quantify the energy u...