International audienceThis work describes the thermodynamic simulation and the experimental investigation of the chemical vapor deposition of silicon oxide and silicon oxynitride films starting from tetra-ethyl-orthosilicate (TEOS), dichlorosilane (DCS) and ammonia mixtures. The simulation reveals that the co-deposition of silicon oxynitride - silicon dioxide films is possible at 710° C and 300 mTorr if the DCS/TEOS ratio is greater than one. If the DCS/TEOS ratio is less than one, the deposited films are exclusively composed of silicon dioxide. These predictions were confirmed in corresponding experiments by using Fourier Transform Infrared spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Auger Electron Spectroscopy (AES) and E...
Szekeres A, Nikolova T, Simeonov S, Gushterov A, Hamelmann F, Heinzmann U. Plasma-assisted chemical ...
In this study, the authors deposited silicon oxynitride films by Radio Frequency Plasma Enhanced Che...
Silicon oxynitride films were deposited at 150 °C using inductively coupled plasma enhanced chemical...
International audienceThis work describes the thermodynamic simulation and the experimental investig...
This work describes the thermodynamic simulation and the experimental investigation of the chemical ...
International audienceThis work describes the thermodynamic simulation and the experimental investig...
International audienceThis work describes the thermodynamic simulation and the experimental investig...
We have used backscattering spectrometry and 15.N(1.H, alpha, gamma)12.C nuclear reaction analysis t...
International audienceAn apparent kinetic model is developed for a novel chemical vapor deposition (...
International audienceAn apparent kinetic model is developed for a novel chemical vapor deposition (...
The chemical composition and structure of silicon oxynitrides, deposited in low pressure and plasma ...
In this work, the correlation between BEMA model and FTIR analysis was employed to investigate the c...
International audienceIn this work, the correlation between BEMA model and FTIR analysis was employe...
International audienceIn this work, the correlation between BEMA model and FTIR analysis was employe...
International audienceIn this work, the correlation between BEMA model and FTIR analysis was employe...
Szekeres A, Nikolova T, Simeonov S, Gushterov A, Hamelmann F, Heinzmann U. Plasma-assisted chemical ...
In this study, the authors deposited silicon oxynitride films by Radio Frequency Plasma Enhanced Che...
Silicon oxynitride films were deposited at 150 °C using inductively coupled plasma enhanced chemical...
International audienceThis work describes the thermodynamic simulation and the experimental investig...
This work describes the thermodynamic simulation and the experimental investigation of the chemical ...
International audienceThis work describes the thermodynamic simulation and the experimental investig...
International audienceThis work describes the thermodynamic simulation and the experimental investig...
We have used backscattering spectrometry and 15.N(1.H, alpha, gamma)12.C nuclear reaction analysis t...
International audienceAn apparent kinetic model is developed for a novel chemical vapor deposition (...
International audienceAn apparent kinetic model is developed for a novel chemical vapor deposition (...
The chemical composition and structure of silicon oxynitrides, deposited in low pressure and plasma ...
In this work, the correlation between BEMA model and FTIR analysis was employed to investigate the c...
International audienceIn this work, the correlation between BEMA model and FTIR analysis was employe...
International audienceIn this work, the correlation between BEMA model and FTIR analysis was employe...
International audienceIn this work, the correlation between BEMA model and FTIR analysis was employe...
Szekeres A, Nikolova T, Simeonov S, Gushterov A, Hamelmann F, Heinzmann U. Plasma-assisted chemical ...
In this study, the authors deposited silicon oxynitride films by Radio Frequency Plasma Enhanced Che...
Silicon oxynitride films were deposited at 150 °C using inductively coupled plasma enhanced chemical...