Analytical prediction of crack width of FRC/RC beams under short and long term bending condition

It is well known that fibers are effective in modifying the cracking pattern development of concrete structural element, causing an higher number of cracks and, consequently, lower crack spacing values and narrower crack widths compared to the matrix alone. This effect could be exploited to improve durability of Reinforced Concrete (RC) structures, especially of those exposed to aggressive environments. The analytical prediction of crack width and spacing in Fiber Reinforced Concrete (FRC) structural elements in bending is still an open issue. A crack width relationship for RC elements with fibers similar to those developed for classical RC structural members would be desirable for designers. The recent development of important technical design codes, such as RILEM TC 162 TDF and the new MC2010, embrace this idea. However further validation of these models by experimental results are still needed. On the other hand, the study of the influence of a sustained load on crack width in presence of the fiber reinforcement is a topic almost unexplored and important at the same time. In the present work, the cracking behaviour of full-scale concrete beams reinforced with both traditional steel bars and short fibers has been analyzed under short and long term flexural loading. A theoretical prediction of crack width and crack spacing was carried out according to different international design provisions. The analytical results are discussed and compared in order to highlight the differences between the models and to check the reliability of the theoretical predictions on the basis of the experimental data