In this work we have fabricated and characterized GaN based surface acoustic wave (SAW) delay lines grown by metal organic chemical vapor deposition (MOCVD) on sapphire substrate. The acoustic wave velocity of 0th Rayleigh and Sezawa modes, and the piezoelectric electromechanical coupling constant have been measured for different wave numbers in a 2 mum-thick layer. The acoustic velocity resulted to be independent from the layer resistivity, which strongly affects the noise level. Through the introduction of a highly resistive GaN buffer layer, a noise level as low as -70 dB has been measured. This result has been attributed to a reduced coupling between the input and output terminals
International audienceIn our previous research we already demonstrated micro acoustic devices, such ...
AbstractIn this work we demonstrate the fabrication process and electrical characterization of GaN/S...
International audience— Surface acoustic waves (SAW) technology is very promising to achieve wireles...
In this work we have fabricated and characterized GaN-based surface acoustic wave filters grown by m...
The surface morphology and characteristic parameters were analyzed for surface acoustic wave (SAW) f...
High-quality and high-resistivity GaN films were grown on (0001) sapphire face by metal-organic vapo...
This work presents the first fully integrated surface acoustic wave (SAW) oscillator based on AlGaN/...
The propagation properties of surface acoustic waves (SAWs) in semi-insulating Fe-doped GaN films gr...
ix, 133 leaves : ill. (some col.) ; 30 cm.PolyU Library Call No.: [THS] LG51 .H577M EIE 2004 LaiThe ...
Guiding and manipulating GHz frequency acoustic waves in μm-scale waveguides and resonators opens up...
In this work we investigate the influence of the substrate resistivity and of different buffer layer...
This paper presents a comprehensive study of the performance of Sezawa surface acoustic wave (SAW) d...
Additional contributors: Dr. Jong Noh, Yu Chen, Huan Li, Dr. Mo Li (faculty mentor)Surface acoustic ...
ISBN: 1-4244-0107-0In this paper, we present the modeling of the mechanical part of a MEMS (microele...
During the last decades, sensors technology has been increasingly developed. The widespread use of s...
International audienceIn our previous research we already demonstrated micro acoustic devices, such ...
AbstractIn this work we demonstrate the fabrication process and electrical characterization of GaN/S...
International audience— Surface acoustic waves (SAW) technology is very promising to achieve wireles...
In this work we have fabricated and characterized GaN-based surface acoustic wave filters grown by m...
The surface morphology and characteristic parameters were analyzed for surface acoustic wave (SAW) f...
High-quality and high-resistivity GaN films were grown on (0001) sapphire face by metal-organic vapo...
This work presents the first fully integrated surface acoustic wave (SAW) oscillator based on AlGaN/...
The propagation properties of surface acoustic waves (SAWs) in semi-insulating Fe-doped GaN films gr...
ix, 133 leaves : ill. (some col.) ; 30 cm.PolyU Library Call No.: [THS] LG51 .H577M EIE 2004 LaiThe ...
Guiding and manipulating GHz frequency acoustic waves in μm-scale waveguides and resonators opens up...
In this work we investigate the influence of the substrate resistivity and of different buffer layer...
This paper presents a comprehensive study of the performance of Sezawa surface acoustic wave (SAW) d...
Additional contributors: Dr. Jong Noh, Yu Chen, Huan Li, Dr. Mo Li (faculty mentor)Surface acoustic ...
ISBN: 1-4244-0107-0In this paper, we present the modeling of the mechanical part of a MEMS (microele...
During the last decades, sensors technology has been increasingly developed. The widespread use of s...
International audienceIn our previous research we already demonstrated micro acoustic devices, such ...
AbstractIn this work we demonstrate the fabrication process and electrical characterization of GaN/S...
International audience— Surface acoustic waves (SAW) technology is very promising to achieve wireles...