Add to ORKG© The author(s). This paper is focused on the possibility of using magnetite powders obtained by chemical and plasma-chemical method for sorption concentration of arsenic ions. Processes of arsenic concentration by two-site sorption in magnetite-water system have been studied, and the optimal conditions for concentration have been defined. In static mode, effects of pH, temperature and contact time on the adsorption process have been studied. As a result, a method for pre-sorption concentration has been proposed, allowing reducing the lower limit of the atomic absorption determination of arsenic content
By a chemical method, using a method offered by Massart, where as the use of initial solutions of ch...
Development of reliable, environmentally safe and economically advantageous methods of water purific...
Consumption of drinking water containing arsenic at concentrations even below the World Health Organ...
© The author(s). This paper is focused on the possibility of using magnetite powders obtained by che...
The interaction of arsenite (As(III)) and arsenate (As(V)) with magnetite nanoparticles has been stu...
This paper addresses the possibility of using magnetite nanoparticles for sorption concentration of ...
A novel magnetic adsorbent was synthesized by solvothermal method for the removal of arsenic from aq...
Numerous studies have examined arsenic adsorption on varying adsorbents including iron oxides, alumi...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Background: Zero-valent iron can control the sites contaminated Arsenic (V) used. The aim of this re...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Abstract Aims: Arsenic contamination of natural water resources has become an important environmen...
Nanomaterials (typically 1~100nm in diameter) have been of considerable environmental attention due ...
Magnetite nanoparticles (NPs) were synthetized by partial oxidation of hot Fe(II) sulfate aqueous so...
The surface chemistry of inorganic materials is of great significance in a number of industrially im...
By a chemical method, using a method offered by Massart, where as the use of initial solutions of ch...
Development of reliable, environmentally safe and economically advantageous methods of water purific...
Consumption of drinking water containing arsenic at concentrations even below the World Health Organ...
© The author(s). This paper is focused on the possibility of using magnetite powders obtained by che...
The interaction of arsenite (As(III)) and arsenate (As(V)) with magnetite nanoparticles has been stu...
This paper addresses the possibility of using magnetite nanoparticles for sorption concentration of ...
A novel magnetic adsorbent was synthesized by solvothermal method for the removal of arsenic from aq...
Numerous studies have examined arsenic adsorption on varying adsorbents including iron oxides, alumi...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Background: Zero-valent iron can control the sites contaminated Arsenic (V) used. The aim of this re...
The paper is devoted to the development of a method for obtaining and using iron-containing sorption...
Abstract Aims: Arsenic contamination of natural water resources has become an important environmen...
Nanomaterials (typically 1~100nm in diameter) have been of considerable environmental attention due ...
Magnetite nanoparticles (NPs) were synthetized by partial oxidation of hot Fe(II) sulfate aqueous so...
The surface chemistry of inorganic materials is of great significance in a number of industrially im...
By a chemical method, using a method offered by Massart, where as the use of initial solutions of ch...
Development of reliable, environmentally safe and economically advantageous methods of water purific...
Consumption of drinking water containing arsenic at concentrations even below the World Health Organ...