We present in-depth profiling of chemical bonding features and defect state density in ultrathin HfSiOxNy (Hf/(Hf+Si)=~43%) films with average nitrogen contents up to ~18at.% by using x-ray photoelectron spectroscopy (XPS) and total photoelectron yield spectroscopy (PYS) in combination with oxide thinning in a dilute HF solution. The films were prepared on pre-cleaned Si(100) by an atomic layer chemical vapor deposition (ALCVD) method and followed by plasma nitridation. By annealing at 1050°C in N2 ambience, Si-N bonding units in the films are increased as a result of thermal decomposition of Hf-Nx(x=2 and 3) units and the interfacial oxidation accompanied with nitrogen incorporation is caused. For the annealed samples, Hf ions coordinated ...
Oxygen is often detected as impurity in metal and metal nitride films prepared by atomic layer depos...
Thin layers of HfO2 grown on the (1 0 0) Si crystal surface using atomic layer deposition or metallo...
Low leakage current density and high relative permittivity (dielectric constant) are the key factor ...
We present in-depth profiling of chemical bonding features and defect state density in ultrathin HfS...
We present in-depth profiling of chemical bonding features and defect state density in ultrathin HfS...
We use spatially resolved spectroscopy in a scanning transmission electron microscope to study the t...
The interfacial characteristics and thermal stability of nitrided HfO2 films grown on strained Si0.7...
HfSiON films deposited on Si (001) by reactive sputtering were submitted to rapid thermal annealing ...
The interfacial structures of HfO 2 and HfAlO thin films on Si have been investigated using spatiall...
International audienceThe defects in the as-deposited and nitrided Si/SiO2/Hf1-xSiO(2) stacks have b...
HfSiO films on Si were sequentially annealed in vacuum, oxygen, hydrogen, or deuterium atmospheres f...
The atomic structure of HfSiO and HfSiON was investigated before and after thermal annealing using x...
Ultra-thin high-k layers based on HfO2, or Hf-silicates in combination with sub-nanometer SiO2, show...
We investigated the effect of post annealing on the electrical and physical properties of atomic-lay...
[[abstract]]The depth profile of the HfO2/Si interface grown by molecular beam epitaxy (MBE) has bee...
Oxygen is often detected as impurity in metal and metal nitride films prepared by atomic layer depos...
Thin layers of HfO2 grown on the (1 0 0) Si crystal surface using atomic layer deposition or metallo...
Low leakage current density and high relative permittivity (dielectric constant) are the key factor ...
We present in-depth profiling of chemical bonding features and defect state density in ultrathin HfS...
We present in-depth profiling of chemical bonding features and defect state density in ultrathin HfS...
We use spatially resolved spectroscopy in a scanning transmission electron microscope to study the t...
The interfacial characteristics and thermal stability of nitrided HfO2 films grown on strained Si0.7...
HfSiON films deposited on Si (001) by reactive sputtering were submitted to rapid thermal annealing ...
The interfacial structures of HfO 2 and HfAlO thin films on Si have been investigated using spatiall...
International audienceThe defects in the as-deposited and nitrided Si/SiO2/Hf1-xSiO(2) stacks have b...
HfSiO films on Si were sequentially annealed in vacuum, oxygen, hydrogen, or deuterium atmospheres f...
The atomic structure of HfSiO and HfSiON was investigated before and after thermal annealing using x...
Ultra-thin high-k layers based on HfO2, or Hf-silicates in combination with sub-nanometer SiO2, show...
We investigated the effect of post annealing on the electrical and physical properties of atomic-lay...
[[abstract]]The depth profile of the HfO2/Si interface grown by molecular beam epitaxy (MBE) has bee...
Oxygen is often detected as impurity in metal and metal nitride films prepared by atomic layer depos...
Thin layers of HfO2 grown on the (1 0 0) Si crystal surface using atomic layer deposition or metallo...
Low leakage current density and high relative permittivity (dielectric constant) are the key factor ...