Authors tried to butt-weld a mild steel plate to a magnesium alloy plate by the solid state welding using a rotating pin. This study investigated the effects of pin rotation speed, the position for the pin axis to be plunged on the strength and the microstructure of the joint. The main results obtained are as follows. Butt-welding of a steel plate to a magnesium alloy plate was easily and successfully achieved. The maximum tensile strength of a joint reached about 70% of the magnesium base metal tensile strength and the fracture path was along the joint interface. When pin rotation was slow, some defects appeared in the magnesium matrix of a joint due to insufficient plasticization of the magnesium. The joint strength increased with the pin...
Magnesium is one type of material that can be used as a base metal in welding. Magnesium has superio...
To optimize the tool geometry (Pin profile) and process parameters for the FSW process. In the prese...
Three rotation rates were selected for friction stir welded (FSW) rolled AZ31 plates, at a constant ...
Authors tried to butt-weld a mild steel plate to an aluminum alloy plate by the solid slate welding ...
This paper describes a butt-welding of AZ31B magnesium alloy plate to commercially pure titanium (CP...
AbstractMagnesium is flammable material and to avoid its limitation of fusion welding solid state we...
There is an increasing demand for mixed joints made of hard-weldable steels used in the construction...
We tried to join steel to Al-Mg alloy using a resistance spot welding method. The effect of Mg in Al...
In order to explore the influences of different pins on the weld based on the specialty of the alumi...
The present investigation aims at studying the effect of different tool geometries and process param...
Friction stir welding is a solid-state welding process invented by the welding institute (TWI) of UK...
This study focuses on the effect of pin taper tool ratio on friction stir welding of magnesium alloy...
Joining two dissimilar metals, specifically Mg and Al alloys, using conventional welding techniques ...
The article presents results of testing the quality of FSW welded joints made in plates of various m...
© 2018 Institute of Physics Publishing. All rights reserved. In this paper effects of welding on mec...
Magnesium is one type of material that can be used as a base metal in welding. Magnesium has superio...
To optimize the tool geometry (Pin profile) and process parameters for the FSW process. In the prese...
Three rotation rates were selected for friction stir welded (FSW) rolled AZ31 plates, at a constant ...
Authors tried to butt-weld a mild steel plate to an aluminum alloy plate by the solid slate welding ...
This paper describes a butt-welding of AZ31B magnesium alloy plate to commercially pure titanium (CP...
AbstractMagnesium is flammable material and to avoid its limitation of fusion welding solid state we...
There is an increasing demand for mixed joints made of hard-weldable steels used in the construction...
We tried to join steel to Al-Mg alloy using a resistance spot welding method. The effect of Mg in Al...
In order to explore the influences of different pins on the weld based on the specialty of the alumi...
The present investigation aims at studying the effect of different tool geometries and process param...
Friction stir welding is a solid-state welding process invented by the welding institute (TWI) of UK...
This study focuses on the effect of pin taper tool ratio on friction stir welding of magnesium alloy...
Joining two dissimilar metals, specifically Mg and Al alloys, using conventional welding techniques ...
The article presents results of testing the quality of FSW welded joints made in plates of various m...
© 2018 Institute of Physics Publishing. All rights reserved. In this paper effects of welding on mec...
Magnesium is one type of material that can be used as a base metal in welding. Magnesium has superio...
To optimize the tool geometry (Pin profile) and process parameters for the FSW process. In the prese...
Three rotation rates were selected for friction stir welded (FSW) rolled AZ31 plates, at a constant ...