金沢大学理工研究域物質化学系We developed an inverted type bulk-heterojunction organic solar cell with 1 cm2 active area using a fluorine-doped tin oxide/electrodeposited amorphous (TiOx) or anatase (TiO2) titanium oxide electrode instead of the low work-functional electrode such as Al. The cell with TiO2 showed the power conversion efficiency (η) of 2.5% by irradiating AM 1.5-100 mW cm- 2 simulated sunlight. While, the performance of the cell with TiOx was almost maintained in an ambient atmosphere under continuous light irradiation of 10 h, although slightly small initial η value of 2.1% was observed. Crown Copyright © 2008
>Magister Scientiae - MScWithout reverting to encapsulation, organic bulk - heterojunction solar cel...
WOS: 000476884100013Surface engineering of solar cell subsrate plays an important role to achieve hi...
We report bulk heterojunction organic solar cells utilising the electron-donating polymer PffBT4T-2O...
金沢大学理工研究域物質化学系Chemical bath deposited titanium oxide (TiOx ) as an electron collection layer is intr...
An inverted polymer solar cell was fabricated on a polyethylene terephthalate (PET) substrate. The c...
137 leaves : ill. (some col.) ; 30 cm.PolyU Library Call No.: [THS] LG51 .H577M AP 2013 LoConvention...
WOS: 000377311400044Inverted P3HT:PCBM based organic solar cells were fabricated by using Fe2+ doped...
The stability and efficiency of organic solar cells (OSCs) were improved using thermally stable fluo...
A simple and intuitive deposition technique is discussed to obtain titanium oxide used as an electro...
Organic solar cells based on poly(3-hexylthiophene) and [6,6]-phenyl-C<sub>61</sub>-butyric acid me...
In this study, we investigated inverted hybrid bulk-heterojunction solar cells with the following co...
Fully organic solar cells(OSCs)based on polymers and fullerenes have attracted remarkable interest d...
Over the last few decades, bulk-heterojunction organic photovoltaic devices comprising an intimately...
WOS: 000410606900133The effects of surface modification of titanium dioxide (TiO2) on the performanc...
The effects of surface modification of titanium dioxide (TiO 2 ) on the performance of inverted type...
>Magister Scientiae - MScWithout reverting to encapsulation, organic bulk - heterojunction solar cel...
WOS: 000476884100013Surface engineering of solar cell subsrate plays an important role to achieve hi...
We report bulk heterojunction organic solar cells utilising the electron-donating polymer PffBT4T-2O...
金沢大学理工研究域物質化学系Chemical bath deposited titanium oxide (TiOx ) as an electron collection layer is intr...
An inverted polymer solar cell was fabricated on a polyethylene terephthalate (PET) substrate. The c...
137 leaves : ill. (some col.) ; 30 cm.PolyU Library Call No.: [THS] LG51 .H577M AP 2013 LoConvention...
WOS: 000377311400044Inverted P3HT:PCBM based organic solar cells were fabricated by using Fe2+ doped...
The stability and efficiency of organic solar cells (OSCs) were improved using thermally stable fluo...
A simple and intuitive deposition technique is discussed to obtain titanium oxide used as an electro...
Organic solar cells based on poly(3-hexylthiophene) and [6,6]-phenyl-C<sub>61</sub>-butyric acid me...
In this study, we investigated inverted hybrid bulk-heterojunction solar cells with the following co...
Fully organic solar cells(OSCs)based on polymers and fullerenes have attracted remarkable interest d...
Over the last few decades, bulk-heterojunction organic photovoltaic devices comprising an intimately...
WOS: 000410606900133The effects of surface modification of titanium dioxide (TiO2) on the performanc...
The effects of surface modification of titanium dioxide (TiO 2 ) on the performance of inverted type...
>Magister Scientiae - MScWithout reverting to encapsulation, organic bulk - heterojunction solar cel...
WOS: 000476884100013Surface engineering of solar cell subsrate plays an important role to achieve hi...
We report bulk heterojunction organic solar cells utilising the electron-donating polymer PffBT4T-2O...