Potential Sources of Stormwater Pollutants : Leaching of Metals and Organic Compounds from Roofing Materials

Runoff from paved surfaces in the urban environment is recognised as a major contributing source to deteriorated water quality. In stormwater, both various metals and organic compounds can be present and the quality of stormwater is dependent on e.g. the characteristics of the surfaces that the runoff encounters. Diffuse pollution sources, i.e. anthropogenic emissions from e.g. traffic or constructions, has been pointed out by the European Water Framework Directive to significantly contribute to pollution of stormwater receivers. In order to create and obtain a sustainable, liveable and aesthetical urban environment it is critical to be able to mitigate stormwater pollution, not least considering the increasing amount of stormwater due to climate change.The aim of this master’s thesis was to evaluate the potential release of inorganic- and organic stormwater pollutants from conventional roofing materials by laboratory leaching experiments. The study was mainly aimed to serve as a first screening on the roofing materials, in order to be able to select a number of materials for further investigation later on. The organic compounds included in this study were polycyclic aromatic hydrocarbons, nonylphenols and -ethoxylates, phthalates and herbicides. Previous research on stormwater pollution has mainly focused on metals and there is therefore a knowledge gap on organic compounds in urban runoff. The leaching experiments were designed considering previous similar studies. Synthetic rainwater was prepared based on measurements of rainwater quality in Sweden. Duplicates of 16 commonly used roofing materials were prepared and immersed in beakers of synthetic rainwater. The beakers were agitated on an orbital shaking device for 24 hours and pH as well as conductivity was recorded in the leachates before sending the samples to the contracted laboratory for analysis. Metals were analysed on all materials and the organic compound analyses were performed on selected materials based on each material’s composition and was limited with the substance’s probability to release from each material.From the analysis results, mean values for the leached concentrations of all duplicates were calculated. The annual potential release of substances from materials was estimated based on the leached concentrations and data on the average annual precipitation in Sweden, in order to get an indication of the order of magnitude of the pollutant release. The results showed a potential release of a number of the included substances from many of the studied roofing materials, in varying order of magnitude. The shingle roofing was the material that showed the ability to release the largest number of pollutants. Some materials e.g. the clay tile also showed potential to adsorb substances on the material surface. Metals were mainly released in dissolved form from most materials. Phthalates were not present in concentrations above report limits in the leachates from any of the studied materials. The results also indicate a significant different in the release potential from materials that were considered similar in their composition and expected to have similar leaching behaviour prior to the laboratory experiments, e.g. two similar felt roof materials from different manufacturers.Validerat; 20150715 (global_studentproject_submitter)