Advanced high speed data and clock transmission over optical fibre for square kilometre telescope array

There is an ever present need from Internet users for more bandwidth. This is manifested by continuous increase in bandwidth demanding applications such as 5G wireless, new end user consumer links like thunderbolt, video conferencing, high definition video-on-demand transmitted over the Internet and massive data transfers required with and within data centres for backup, storage and data processing in cloud computing. Fibre optic communications technologies are playing a pivotal role in communication, being a major enabling technology in our increasingly Internet-centric society. As network services continue to become more dynamic and diverse, Internet service providers are faced with a challenge of cost reduction in the transmission network, power and spectral efficiency as well as scalability of the optical network infrastructure to support incremental expansions and virtual machines. Intelligent design of terrestrial optical networks to allow for simultaneous signal transmission through shared network infrastructure, and the use of low cost, power efficient, high bandwidth transmitters such as vertical surface emitting lasers (VCSELs) as well as exploitation of spectral efficient in-complex advanced modulation formats is a viable approach to this situation. In this study, techniques for spectral efficiency upgrade and simultaneous transmission of data signal, reference frequency (RF) clock signal and pulse-per-second (PPS) over shared infrastructure have experimentally been optimized in a laboratory environment for adoption in next-generation telescope array networks such as the Square Kilometre Array (SKA), time keeping systems such as banking systems, Coordinated Universal Time(UTC) timing and Global Positioning Systems (GPS), as well as high capacity spectral efficient short reach optical fibre networks such as data centres. This work starts by experimentally optimizing VCSEL technology for simultaneous transmission of 10 Gbps data and 1.712 GHz RF clock signal over a single G. 655 optical fibre of length 24.75 Km at different channel spacing and different propagation direction for implementation in a cost effective next-generation telescope array network. The wavelength tuneability property of VCSEL transmitters allows for wavelength adjustment, a key requirement for simultaneous data and RF clock signal transmission over a single optical fibre. A receiver sensitivity of -19.19 dBm was experimentally achieved at back-to-back analysis. A 24.75 Km of simultaneous data and RF clock signal transmission performed at 0.4 nm channel spacing introduced a transmission penalty of 1.07 dB and 1.63 dB for counter and co-propagation scheme respectively. This work mainly utilized direct modulation and direct detection using a positive intrinsic negative (PIN) due to its simplicity and cost effectiveness. A novel modulation technique for simultaneous data and polarization-based pulse-per-second timing clock signal transmission using a single VCSEL carrier is experimentally demonstrated. Two signal types, a directly modulated 10 Gbps data signal and a polarization-based pulse per second (PPS) clock signal are modulated onto a single mode 10 GHz bandwidth VCSEL carrier at 1310 nm. Spectral efficiency is maximized by exploiting the inherent orthogonal polarization switching of the xiv VCSEL with changing bias in transmission of the PPS signal. A 10 Gbps VCSEL transmission with PPS over 11 Km of G.652 fibre introduced a transmission penalty of 0.52 dB. The contribution of PPS clock signal to this penalty was found to be 0.08 dB. A technique for simultaneous directly modulated data and phase modulated reference clock signal transmission over a signal channel in wavelength division multiplexing (WDM) solutions is experimentally demonstrated. This is to prepare solutions to the ever-increasing demand over gigabit/s, terabit/s and gigahertz capacities in WDM-based terrestrial optical fibre transmission systems such as telescope array networks. a total capacity of 30 Gbps (310 Gbps) data and 12 GHz ( 4 3 GHz) reference clock signal are multiplexed at a channel spacing of 100 GHz and simultaneously transmitted over a single mode G.655 fibre of length 24.73 Km. The recovery of the phase modulated RF clock signal using a differential delay line interferometry technique is experimentally demonstrated. A 625 Gbps (2525 Gbps) DWDM data transmission system is further implemented in simulation by multiplexing 25 channels at 25 Gbps per channel using 50 GHz channel spacing. A four level pulse amplitude modulation (4-PAM) data modulation format employing VCSELs is experimentally demonstrated for adoption in high bitrate networks such as big data science projects and data centre networks. 4-PAM offers a good trade-off between complexity, efficiency, reach, and sensitivity. A software defined digital signal processing (DSP) receiver is designed and implemented in MATLAB to recover the transmitted 4-PAM data signal cost effectively without the necessity of costly receiver hardware. A novel technique for maximizing carrier spectral efficiency through simultaneous 20 Gbps 4-PAM data and phase modulated 2 GHz RF clock signal transmission on a single mode 10 GHz bandwidth VCSEL carrier at 1310 nm is experimentally demonstrated for the first time to the best of our knowledge. Data transmission and clock stability performance of the designed high spectral efficient VCSEL-based link network is evaluated through BER curve plots, phase noise measurements and Allan variance analysis respectively. VCSEL-based Raman amplification is experimentally demonstrated as a viable approach for RF clock signal distribution in extended reach astronomical telescope array networks and other extended reach terrestrial optical fibre network application. This is achieved by adopting two pumping techniques namely forward pumping and backward pumping. A maximum on off gain of 5.7 dB and 1.5 dB was experimentally attained for forward pumping and backward pumping at 24 dBm pump power respectively, while a maximum 100.8 Km fibre transmission achieved experimentally. In summary, this study has successfully demonstrated in-complex, spectral efficient, low cost and power efficient simultaneous data signal, reference frequency (RF) clock signal and pulse-per-second (PPS) transmission techniques over shared network infrastructure. Simultaneous transmission of data, RF clock and PPS timing signal is relevant in nextgeneration telescope array networks such as the Square Kilometre Array (SKA), time keeping systems such as banking systems, Coordinated Universal Time (UTC) timing and Global Positioning Systems (GPS), as well as high capacity spectral efficient short reach optical fibre networks such as data centres