Fatigue behaviour study of laser hybrid welded eccentric fillet joints : Part I

Welded joints are a major component that is often responsible for causing a structure failure or for being the point at which fatigue cracking initiates and propagates. Despite tremendous research efforts, the understanding of fatigue behaviour is still limited, particularly for new techniques like laser hybrid welding. Beside a comprehensive state-of-the-art study, the paper presents a fatigue study of laser hybrid welded eccentric fillet joint of stainless steel of 10 mm thickness, with 5 mm displacement. Motivation is to study the influence of the surface geometry shape on fatigue performance under a four point bending test. 13 samples were produced, measuring the toe radii and testing under constant amplitude loading with stress ratio R=0. Different techniques have been used to measure local weld geometry, like plastic replica, a 3D optical profiler and a 3D-digitizer. The influence of the local weld geometry, like the toe radii, on the stress concentration was studied by FE-analysis. Occasionally lack of fusion was observed, which was taken into account in the FE-analysis. Based on the nominal stress approach, SN-curves were designed for laser hybrid welded eccentric fillet joints. Macro hardness tests were carried out and the crack surfaces were observed in order to detect crack initiation and propagation. Correlations between the toe radii, the corresponding stress maxima and crack initiation locations were studied between the different samples and even along the welds.Godkänd; 2009; Bibliografisk uppgift: CD-ROM; 20090921 (minala