This study reports on the seepage of metals, metalloids and radionuclides from the Mary Kathleen uranium mill tailings repository. Since rehabilitation in the 1980s, the capped tailings have developed a stratified hydrochemistry, with acid (pH 3.7), saline, metal-rich (Fe, Mn, Ni, U ± As, Pb, Zn), oxygenated (1.05 mg L^−1 DO), radioactive waters in the upper tailings pile and near-neutral pH (pH 7.57), metal-poor, reduced (0.08 mg L−1 DO) waters at depth. Seepage (~0.5 L s^−1) of acid (pH 5.5), metal-rich (Fe, Mn ± Ni, U, Zn), radioactive (U-235, U-238, Ra-226, Ra-228, Ac-227) waters occurs from the base of the tailings dam retaining wall into the former evaporation pond and local drainage system. Oxygenation of the seepage waters causes th...
Uranium mill tailings from the Ranger mine, located in the Alligator Rivers Region of the Northern T...
Rare earth elements are increasingly required for use in modern high-tech components, and primary pr...
Rare earth elements are increasingly required for use in modern high-tech components, and primary pr...
This study reports on the seepage of metals, metalloids and radionuclides from the Mary Kathleen ura...
The Mary Kathleen tailings storage facility (TSF) contains 7.1 Mt of uranium mill tailings. This was...
International audienceUranium mining activities expose uranium ore and mine tailings to the surface ...
An abandoned uranium tailings dam at Moline in the Northern Territory of Australia was the site of ...
The major aim of this project has been to investigate the current environmental status of the histo...
This study investigated an uncapped tailings storage facility in a semi-arid subtropical climate, wi...
This study reports on the transfer of contaminants from waste rock dumps and mineralised ground into...
Tailings deposits from gold and uranium (U) mining in the Witwatersrand basin often contain elevated...
The Radium Hill uranium deposit was mined for radium\ud between 1906 and 1931 and uranium between 19...
The study focused on the seepage of uranium from unlined tailing dams into the alluvial aquifer in t...
Inactive uranium mill tailings were surveyed in the Province of Ontario to describe their surface ch...
Establishing a shallow water cover over tailings deposited in a designated storage facility is one o...
Uranium mill tailings from the Ranger mine, located in the Alligator Rivers Region of the Northern T...
Rare earth elements are increasingly required for use in modern high-tech components, and primary pr...
Rare earth elements are increasingly required for use in modern high-tech components, and primary pr...
This study reports on the seepage of metals, metalloids and radionuclides from the Mary Kathleen ura...
The Mary Kathleen tailings storage facility (TSF) contains 7.1 Mt of uranium mill tailings. This was...
International audienceUranium mining activities expose uranium ore and mine tailings to the surface ...
An abandoned uranium tailings dam at Moline in the Northern Territory of Australia was the site of ...
The major aim of this project has been to investigate the current environmental status of the histo...
This study investigated an uncapped tailings storage facility in a semi-arid subtropical climate, wi...
This study reports on the transfer of contaminants from waste rock dumps and mineralised ground into...
Tailings deposits from gold and uranium (U) mining in the Witwatersrand basin often contain elevated...
The Radium Hill uranium deposit was mined for radium\ud between 1906 and 1931 and uranium between 19...
The study focused on the seepage of uranium from unlined tailing dams into the alluvial aquifer in t...
Inactive uranium mill tailings were surveyed in the Province of Ontario to describe their surface ch...
Establishing a shallow water cover over tailings deposited in a designated storage facility is one o...
Uranium mill tailings from the Ranger mine, located in the Alligator Rivers Region of the Northern T...
Rare earth elements are increasingly required for use in modern high-tech components, and primary pr...
Rare earth elements are increasingly required for use in modern high-tech components, and primary pr...