The extreme conditions of high pressure and shear imposed in a lubricated sliding contact could influence tribochemical reactions that could occur over long sliding distances and time scales, possibly leading to changes in both friction and film thickness. Experiments conducted with 12 plant oils reveal for the first time, that thin lubricating films of some plant oils can grow to thicknesses much greater than what is predicted from either elastohydrodyamic theory or their adsorbed molecular heights. Some films grew as much as 25 times in thickness (unrefined canola oil), while others remained roughly unchanged (flaxseed and olive oil), or grew slightly and then collapsed during the test (safflower oil). The absence of a loss in film thickn...
A rheological model of stress relaxation in a thin lubricant film, which is formed on the friction s...
Ultrathin-film interferometry was used to investigate the developing process of boundary films in a ...
To improve the transmission efficiency of a continuously variable transmission (CVT) system, it is e...
In recent years, metal working oil is required to have lower viscosity and higher lubricity than eve...
In this work, the physical phenomenon of the formation of an oil film containing fullerenes was furt...
This study considers the mechanisms of forming the thickness of the lubricant layer with mineral and...
The paper herein proposes a method to simultaneously measure the friction, wear, and thickness of bo...
The lubrication mechanisms of different lamellar fluids are investigated as they are introduced in t...
When a concentrated contact is lubricated at low speed by an oil-in-water emulsion, a film of pure o...
Many food products are highly structured, complex hydrocolloids that are characterized by either a g...
This study investigates the film formation and friction in grease lubricated, rolling-sliding, non-c...
International audienceThe development of high-performance lubricants to insure the separation of mec...
Single-phase (neat oil) and two-phase (oil-in-water emulsions) lubricants are widely used in metal f...
A rheological model of stress relaxation in a thin lubricant film, which is formed on the friction s...
From the viewpoint of natural environmental requirement, the applications of biodegradable lubricant...
A rheological model of stress relaxation in a thin lubricant film, which is formed on the friction s...
Ultrathin-film interferometry was used to investigate the developing process of boundary films in a ...
To improve the transmission efficiency of a continuously variable transmission (CVT) system, it is e...
In recent years, metal working oil is required to have lower viscosity and higher lubricity than eve...
In this work, the physical phenomenon of the formation of an oil film containing fullerenes was furt...
This study considers the mechanisms of forming the thickness of the lubricant layer with mineral and...
The paper herein proposes a method to simultaneously measure the friction, wear, and thickness of bo...
The lubrication mechanisms of different lamellar fluids are investigated as they are introduced in t...
When a concentrated contact is lubricated at low speed by an oil-in-water emulsion, a film of pure o...
Many food products are highly structured, complex hydrocolloids that are characterized by either a g...
This study investigates the film formation and friction in grease lubricated, rolling-sliding, non-c...
International audienceThe development of high-performance lubricants to insure the separation of mec...
Single-phase (neat oil) and two-phase (oil-in-water emulsions) lubricants are widely used in metal f...
A rheological model of stress relaxation in a thin lubricant film, which is formed on the friction s...
From the viewpoint of natural environmental requirement, the applications of biodegradable lubricant...
A rheological model of stress relaxation in a thin lubricant film, which is formed on the friction s...
Ultrathin-film interferometry was used to investigate the developing process of boundary films in a ...
To improve the transmission efficiency of a continuously variable transmission (CVT) system, it is e...