Performance enhancement of AC machines and permanent magnet generators for sustainable energy applications.

Sustainable energy solutions are aimed to reduce the consumption of fossil fuels by using renewable energy sources and energy efficiency techniques. This thesis presents two new sustainable energy applications in the field of electrical machines.Polyphase induction motors dominate the energy usage spectrum for industrial and commercial applications. The conventional winding structure used in both synchronous and induction machines has a basic unit of the winding with a 60 degree phase belt and a three phase connection either in star or delta. A new winding structure using an innovative Star-Delta Series Connection (SDSC) which has a high winding coefficient and low harmonic content is presented in this thesis. The principle of the SDSC winding is described. The Electro-Magnetic Belt and Electro-Magnetic Space diagram are two important means to be used for optimization of the new winding. Experimental results from two prototypes confirm the theoretical analysis. The efficiency of the new machine at rated load increased by about 3.8% as compared to the standard machine with a conventional winding structure.Wind energy is one of the most attractive renewable energy options. Wind turbines are designed to couple either synchronous or asynchronous generators with various forms of direct or indirect connection with grid or diesel generators. Permanent magnet (PM) generators using high energy Neodymium- Iron-Boron magnets offer advantages such as direct coupling without gear box, absence of excitation winding and slip rings, light weight and smaller size. This thesis presents the design and development of an outer-rotor PM generator suitable for wind energy conversion. The initial electromagnetic design followed by a Finite Element Analysis is presented in detail. A 20 kW prototype machine was built and extensively tested. It was found that the machine could maintain an efficiency of about 85% for a wide operating range. Equivalent circuit models were developed. The results of the Finite Element analysis matches closely with the experimental and the designed values