APS March Meeting 2017, New Orleans, Louisiana, March 13–17, 2017. -- http://meetings.aps.org/Meeting/MAR17/Session/T1.7Nanostructured gratings of semicrystalline polymers like poly(propylene azelate) (PPAz) or of ferroelectric copolymers of vinylidene uoride(VDF) and triuoroethylene(TrFE) have been prepared over spin-coated thin lms by Nanoimprint Lithography (NIL). The structure and morphology of the gratings have been investigated by combining Atomic Force Microscopy (AFM) and Grazing Incidence X-ray Scattering at small angle (GISAXS) and wide angle (GIWAXS). The results reveal that NIL aects signicantly the orientation of the crystalline lamellae. In both cases gratings are more abundant in edge-on lamellae than the reference non-prin...
The past decade has witnessed an explosion of techniques used to pattern polymers on the nano (1–100...
In this paper, we address the reflow behavior of polymer thin films, focusing our effort on the accu...
Grazing-incidence small-angle X-ray scattering (GISAXS) has been used to structurally characterize m...
7 pags.; 9 figs.© 2015 Elsevier Ltd. All rights reserved. Nanostructured gratings of semicrystalline...
In this work, well-defined low aspect ratio nanostructures based on nanogratings on thin films of po...
Grazing-incidence small-angle X-ray scattering (GISAXS) can be used to characterize the replica qual...
We demonstrate how AFM nanolithography, with a proper choice of scan pattern, can induce an exceptio...
Directional dry etching of polymer films under oxygen plasmas combined with a controlled crystalliza...
Nanoimprint lithography (NIL) was used to shape thin films of a ferroelectric copolymer of vinyliden...
We demonstrate how AFM nanolithography, with a proper choice of scan pattern, can induce an exceptio...
Nanoimprint lithography ( NIL) is a low-cost and high resolution technique consisting of replicating...
Nanostructured grating surfaces with groove widths less than 200 nm impose boundary conditions that ...
Fused filament fabrication (FFF) is among the most accessible and rapidly developing additive manufa...
The successful development of ferroelectric polymer devices depends on the effective fabrication of ...
The past decade has witnessed an explosion of techniques used to pattern polymers on the nano (1–100...
In this paper, we address the reflow behavior of polymer thin films, focusing our effort on the accu...
Grazing-incidence small-angle X-ray scattering (GISAXS) has been used to structurally characterize m...
7 pags.; 9 figs.© 2015 Elsevier Ltd. All rights reserved. Nanostructured gratings of semicrystalline...
In this work, well-defined low aspect ratio nanostructures based on nanogratings on thin films of po...
Grazing-incidence small-angle X-ray scattering (GISAXS) can be used to characterize the replica qual...
We demonstrate how AFM nanolithography, with a proper choice of scan pattern, can induce an exceptio...
Directional dry etching of polymer films under oxygen plasmas combined with a controlled crystalliza...
Nanoimprint lithography (NIL) was used to shape thin films of a ferroelectric copolymer of vinyliden...
We demonstrate how AFM nanolithography, with a proper choice of scan pattern, can induce an exceptio...
Nanoimprint lithography ( NIL) is a low-cost and high resolution technique consisting of replicating...
Nanostructured grating surfaces with groove widths less than 200 nm impose boundary conditions that ...
Fused filament fabrication (FFF) is among the most accessible and rapidly developing additive manufa...
The successful development of ferroelectric polymer devices depends on the effective fabrication of ...
The past decade has witnessed an explosion of techniques used to pattern polymers on the nano (1–100...
In this paper, we address the reflow behavior of polymer thin films, focusing our effort on the accu...
Grazing-incidence small-angle X-ray scattering (GISAXS) has been used to structurally characterize m...