Improving fire retardancy of cellulosic thermal insulating materials by coating with bio-based fire retardants

Sustainable thermal insulating materials produced from cellulosic fibers provide a viable alternative to plastic insulation foams. Industrially available, abundant, and inexpensive mechanical pulp fiber and recycled textile fiber provide potential raw materials to produce thermal insulating materials. To improve the fire retardancy of low-density thermal insulating materials produced from recycled cotton denim and mechanical pulp fibers, bio-based fire retardants, such as sulfonated kraft lignin, kraft lignin, and nanoclays, were coated onto sustainable insulating material surfaces to enhance their fire retardancy. Microfibrillated cellulose was used as a bio-based binder in the coating formula to disperse and bond the fire-retardant particles to the underlying thermal insulating materials. The flammability of the coated thermal insulating materials was tested using a single-flame source test and cone calorimetry. The results showed that sulfonated kraft lignin-coated cellulosic thermal insulating materials had a better fire retardancy compared with that for kraft lignin with a coating weight of 0.8 kg/m2. Nanoclay-coated samples had the best fire retardancy and did not ignite under a heat flux of 25 kW/m2, as shown by cone calorimetry and single- flame source tests, respectively. These cost-efficient and bio-based fire retardants have broad applications as sustainable thermal insulating materials for improved fire retardancy.QC 20180822Accepted by Nordic Pulp & Paper Research Journal