The solidification path and microstructure of cast Mg-9Zn and Mg-8Zn-1.5MM (misch metal) alloys have been investigated by a combination of thermal analysis and analytical electron microscopy. The addition of 1.5 wt pct MM had a strong influence on the as-cast microstructure with the introduction of new "ternary" interdendritic phases and structural modification of known binary phases. The temperature ranges for formation of these phases from the melt were identified, their crystal structures determined, and their compositions analyzed. Products from eutectoidal decomposition of the interdendritic phase in the binary Mg-9Zn alloy were also identified
Ciclo de Conferencias "Embajadores" del CENIMNeodymium, a Rare Earth with low solid solubility in Mg...
The quantitative study of rare earth compounds is important for the improvement of existing magnesiu...
Neodymium, a Rare Earth with low solid solubility in Mg is an ideal alloying element to improve the ...
Microstructural analysis of as-cast Mg-9Al-0.9Zn-xRE (x = 0, 1, 2, 3, 5 wt.%) magnesium alloys is pr...
Microstructural analysis of as-cast Mg-9Al-0.9Zn-xRE (x = 0, 1, 2, 3, 5 wt.%) magnesium alloys is pr...
The solidification microstructures of the Mg–30Zn–2.5Y alloy have been studied in detail using both ...
The effects of Y addition amount on the microstructures and mechanical properties of as-cast Mg-Zn-N...
MgxYyGd (x+y=15 wt.%) alloys were produced via permanent mould casting to investigate the microstruc...
MgxYyGd (x+y=15 wt.%) alloys were produced via permanent mould casting to investigate the microstruc...
Mg-(1-10)Zn-(4-6)Al-4RE alloys were prepared by high pressure die casting and their microstructures ...
The phase constitutions of as-cast magnesium (Mg)-Zn-Gd alloys (Zn/Gd = 0.25~60, Zn 0~10 at.%, Gd 0~...
A description of the key solidification steps in the formation of the as-cast microstructure of magn...
A description of the key solidification steps in the formation of the as-cast microstructure of magn...
The effects of Zn addition on the microstructure and mechanical properties of Mg-10Gd-3Y-0.6Zr (wt.%...
The phase constitutions of as-cast magnesium (Mg)-Zn-Gd alloys (Zn/Gd = 0.25~60, Zn 0~10 at.%, Gd 0~...
Ciclo de Conferencias "Embajadores" del CENIMNeodymium, a Rare Earth with low solid solubility in Mg...
The quantitative study of rare earth compounds is important for the improvement of existing magnesiu...
Neodymium, a Rare Earth with low solid solubility in Mg is an ideal alloying element to improve the ...
Microstructural analysis of as-cast Mg-9Al-0.9Zn-xRE (x = 0, 1, 2, 3, 5 wt.%) magnesium alloys is pr...
Microstructural analysis of as-cast Mg-9Al-0.9Zn-xRE (x = 0, 1, 2, 3, 5 wt.%) magnesium alloys is pr...
The solidification microstructures of the Mg–30Zn–2.5Y alloy have been studied in detail using both ...
The effects of Y addition amount on the microstructures and mechanical properties of as-cast Mg-Zn-N...
MgxYyGd (x+y=15 wt.%) alloys were produced via permanent mould casting to investigate the microstruc...
MgxYyGd (x+y=15 wt.%) alloys were produced via permanent mould casting to investigate the microstruc...
Mg-(1-10)Zn-(4-6)Al-4RE alloys were prepared by high pressure die casting and their microstructures ...
The phase constitutions of as-cast magnesium (Mg)-Zn-Gd alloys (Zn/Gd = 0.25~60, Zn 0~10 at.%, Gd 0~...
A description of the key solidification steps in the formation of the as-cast microstructure of magn...
A description of the key solidification steps in the formation of the as-cast microstructure of magn...
The effects of Zn addition on the microstructure and mechanical properties of Mg-10Gd-3Y-0.6Zr (wt.%...
The phase constitutions of as-cast magnesium (Mg)-Zn-Gd alloys (Zn/Gd = 0.25~60, Zn 0~10 at.%, Gd 0~...
Ciclo de Conferencias "Embajadores" del CENIMNeodymium, a Rare Earth with low solid solubility in Mg...
The quantitative study of rare earth compounds is important for the improvement of existing magnesiu...
Neodymium, a Rare Earth with low solid solubility in Mg is an ideal alloying element to improve the ...