Freestanding Functional Structures by Aerosol-Jet Printing for Stretchable Electronics and Sensing Applications

The requirements for modern electronic devices, particularly those intended for wearable or human health monitoring applications, have rapidly evolved to being both flexible and stretchable. Hence devices, as well as interconnects, need to be capable of retaining functionality even when being mechanically deformed. Most approaches towards achieving this rely on printing or transferring structures onto elastomeric substrates that can withstand stretching. However, the processing involved can often be cumbersome, and the structures themselves tend to suffer from poor fatigue and/or are limited by the mechanical properties of the underlying substrate. Here, we introduce an aerosol-jet printing technique by which fully freestanding functional structures can be built up layer by layer, which are stable and robust upon repeated stretching. The process involves printing a combination of layers of different materials with the desired functionality, onto a substrate coated with a sacrifical film that is subsequently dissolved to release the printed structure. Using this method, we demonstrate freestanding conductive wires can be used as stretchable interconnects/electrodes, and that also function as strain-sensors. We also show that a freestanding capacitive structure functions as a robust, stretchable humidity sensor, paving the way for the development of other multi-layer, multifunctional stretchable devices and sensors