A total of 24 sediment samples with wide dimensional, mineralogical and compositional range were considered, collected from 5 Italian coastal marine sites. The fine fraction (<63 μm) was analyzed using Laser Granulometer (LG) and X-ray Sedigraph (XS) in order to compare data and highlight potential differences. The unexpected variable sandy fraction in nearly all the samples was attributed to clay mineral aggregates. The highest sand percentages detected by XS were attributed to local compositional sediment features. An increase of 15–25% of clay in samples analyzed by XS was attributed to the different working principles of the considered devices. Nevertheless, final results succeeded in characterizing sediment texture and distribution as ...
The qualities of a laser diffraction grain size analyser, the Coulter LS-100 (range claimed by the m...
Samples for grain-size analyses from residual dune ridges were obtained using a vibracore system equ...
Results of a traditional sedimentation technique for grain-size analysis (the sieve-pipette method) ...
A total of 24 sediment samples from 5 different Italian marine sites (4 from Tyrrhenian Sea and 1 fr...
Surface and deep-sea core sediments and two sets of standards were measured by three different techn...
It is shown that a laser granulometric analysis makes it possible to obtain adequate results with re...
Classically, the grain size of soil and sediment samples is determined by the sieve method for the c...
A comparison has been made of sand, silt, and clay percentage of 118 samples from the Ayeyarwady con...
Grain-size distribution is a fundamental tool for interpreting sedimentary units within depositional...
Nowadays there is a growing demand for rapid and accurate determination of grain size distribution. ...
To evaluate correlations between silt and clay fractions determined by pipette method and laser diff...
Abstract: Particle size distribution is a fundamental property of any sediment or soil, and particle...
The results of particle size analyses by the low-technology pipette method and by the modern SediGra...
A comparative study was performed of three instruments used to measure the grain-size distribution o...
Presented in this study is the application of the Image Analysis (I.A.) technique as alternative to ...
The qualities of a laser diffraction grain size analyser, the Coulter LS-100 (range claimed by the m...
Samples for grain-size analyses from residual dune ridges were obtained using a vibracore system equ...
Results of a traditional sedimentation technique for grain-size analysis (the sieve-pipette method) ...
A total of 24 sediment samples from 5 different Italian marine sites (4 from Tyrrhenian Sea and 1 fr...
Surface and deep-sea core sediments and two sets of standards were measured by three different techn...
It is shown that a laser granulometric analysis makes it possible to obtain adequate results with re...
Classically, the grain size of soil and sediment samples is determined by the sieve method for the c...
A comparison has been made of sand, silt, and clay percentage of 118 samples from the Ayeyarwady con...
Grain-size distribution is a fundamental tool for interpreting sedimentary units within depositional...
Nowadays there is a growing demand for rapid and accurate determination of grain size distribution. ...
To evaluate correlations between silt and clay fractions determined by pipette method and laser diff...
Abstract: Particle size distribution is a fundamental property of any sediment or soil, and particle...
The results of particle size analyses by the low-technology pipette method and by the modern SediGra...
A comparative study was performed of three instruments used to measure the grain-size distribution o...
Presented in this study is the application of the Image Analysis (I.A.) technique as alternative to ...
The qualities of a laser diffraction grain size analyser, the Coulter LS-100 (range claimed by the m...
Samples for grain-size analyses from residual dune ridges were obtained using a vibracore system equ...
Results of a traditional sedimentation technique for grain-size analysis (the sieve-pipette method) ...