Add to ORKGThe frequency range 2 – 150 kHz, typically occupied by switching harmonics and communication signals, is still a gap in the IEC emission standards. The main difficulty in reaching a standardized measurement method is finding a suitable power source. The low-frequency and high-frequency content of the power supply is deterministic for the measured emission, as well as the source impedance. Measurements and analyses are done on both PV-inverters and compact fluorescent lamps to see the influence of the source on the emission
There has been a steady growth of grid connected power electronic (PE) equipment over the last few d...
Improvement of power electronic technologies can also introduce various new types of distortions in ...
Assessing the emissions of low-voltage electronic equipment in the high frequency (HF) range (2-150 ...
The frequency range 2 – 150 kHz, typically occupied by switching harmonics and communication signals...
Nowadays, non-linear loads represent the majority of the residential electrical consumers. The limi...
This thesis work has focused on conducted emission (up to 150 kHz) from common lowvoltage appliances...
Power quality is a subject that has received a lot of attention during the last 10 to 20 years, both...
The electronic devices, which contain single phase rectifiers, have significant harmonics emissions....
\u3cp\u3eModern power electronics emit high frequency disturbances which are the remnants of their i...
The objective of this paper is to prove the relationship between the Total Harmonics Disturbance emi...
Improvement of power electronic technologies can also introduce various new types of distortions in ...
Power quality is a subject that has received a lot of attention during the last 10 to 20 years, both...
There has been a steady growth of grid connected power electronic (PE) equipment over the last few d...
Improvement of power electronic technologies can also introduce various new types of distortions in ...
Assessing the emissions of low-voltage electronic equipment in the high frequency (HF) range (2-150 ...
The frequency range 2 – 150 kHz, typically occupied by switching harmonics and communication signals...
Nowadays, non-linear loads represent the majority of the residential electrical consumers. The limi...
This thesis work has focused on conducted emission (up to 150 kHz) from common lowvoltage appliances...
Power quality is a subject that has received a lot of attention during the last 10 to 20 years, both...
The electronic devices, which contain single phase rectifiers, have significant harmonics emissions....
\u3cp\u3eModern power electronics emit high frequency disturbances which are the remnants of their i...
The objective of this paper is to prove the relationship between the Total Harmonics Disturbance emi...
Improvement of power electronic technologies can also introduce various new types of distortions in ...
Power quality is a subject that has received a lot of attention during the last 10 to 20 years, both...
There has been a steady growth of grid connected power electronic (PE) equipment over the last few d...
Improvement of power electronic technologies can also introduce various new types of distortions in ...
Assessing the emissions of low-voltage electronic equipment in the high frequency (HF) range (2-150 ...