Study of the influence of aggregate composition on volume changes and mechanical properties of High Performance Concrete

The master´s thesis deals with the volume changes of concrete during its concrete glow. These volume changes are generally more susceptible to high-strength concretes – HSC, which contain a bigger dose of binder. The theoretical section describes the possible reduction volume change especially in HSC, which are focused on the composition of concrete, especially on the type and particle size distribution of aggregate. Then attention is also paid to the different types of cements and their possible substitution. The part of the theoretical work describes the types of volume changes that may occur. In the experimental part are suggested the HSC by to secure informations. Different kinds of aggregates are used and a continuous or discontinuous grain curve and a different maximum grain size. Part of the sample was made only from CEM I 42,5 R and the second part of the sample from CEM I 42,5 R with the addition of very finely ground limestone. In terms of the part of the work were monitored volume changes of concrete with different composition and also their mechanical properties after 7, 28 and 90 days. Specifically, compressive strength, tensile strength, strength of the surface layers of concrete, water absorption and water-permeability test concrete. In conclusion, are listed all the results of tests