Oxygen rich organic coatings are synthesized in a dielectric barrier discharge at atmospheric pressure. The critical effect of the precursor structure on the final chemical and physical properties of the synthesized coatings and the plasma characteristics are reported. A correlation is proposed between the electrical, optical emission spectroscopy and atmospheric mass spectrometry (MS) measurements of the plasma phase with the chemical properties of the synthesized films. It is shown that the addition of a precursor in an argon plasma leads to a stabilization of the discharge, critically dependent on the precursor structure itself. Different polymerization pathways are evidenced for the saturated and unsaturated precursors by the monitoring...
Allyl methacrylate (AMA) was deposited on aluminium using atmospheric dielectric barrier discharge p...
2,2,4,4,6,8,8-Heptamethylnonane (HMN), a saturated branched hydrocarbon precursor, is deposited by m...
The use of plasma technologies under atmospheric pressure for the surface modification of polymers a...
Oxygen rich organic coatings are synthesized in a dielectric barrier discharge at atmospheric pressu...
Both a hybrid organic-inorganic monomer and a purely organic monomer were atomized and introduced in...
The aim of this work is to develop barrier coatings by using an atmospheric pressure dielectric barr...
In this study, we investigated the atmospheric plasma polymerization of allyl methacrylate (AMA), n-...
This paper presents results on the formation of coatings in an atmospheric pressure dielectric barri...
This paper presents results on the formation of coatings in an atmospheric pressure dielectric barri...
This work deals with the plasma polymerisation of two siloxane precursors, [hexamethyldisiloxane (HM...
This work deals with the plasma polymerisation of two siloxane precursors, [hexamethyldisiloxane (HM...
Plasma polymerization reactions and plasma polymers of xylene/air, xylene/argon, xylene/air/argon, t...
Atmospheric pressure plasma polymerization (APPP) has been revealed as a real alternative to other l...
Polymeric materials are thanks to their advantageous volume properties and due to their relatively l...
Chemically functionalized surfaces may be produced via plasma polymerization, however a high degree ...
Allyl methacrylate (AMA) was deposited on aluminium using atmospheric dielectric barrier discharge p...
2,2,4,4,6,8,8-Heptamethylnonane (HMN), a saturated branched hydrocarbon precursor, is deposited by m...
The use of plasma technologies under atmospheric pressure for the surface modification of polymers a...
Oxygen rich organic coatings are synthesized in a dielectric barrier discharge at atmospheric pressu...
Both a hybrid organic-inorganic monomer and a purely organic monomer were atomized and introduced in...
The aim of this work is to develop barrier coatings by using an atmospheric pressure dielectric barr...
In this study, we investigated the atmospheric plasma polymerization of allyl methacrylate (AMA), n-...
This paper presents results on the formation of coatings in an atmospheric pressure dielectric barri...
This paper presents results on the formation of coatings in an atmospheric pressure dielectric barri...
This work deals with the plasma polymerisation of two siloxane precursors, [hexamethyldisiloxane (HM...
This work deals with the plasma polymerisation of two siloxane precursors, [hexamethyldisiloxane (HM...
Plasma polymerization reactions and plasma polymers of xylene/air, xylene/argon, xylene/air/argon, t...
Atmospheric pressure plasma polymerization (APPP) has been revealed as a real alternative to other l...
Polymeric materials are thanks to their advantageous volume properties and due to their relatively l...
Chemically functionalized surfaces may be produced via plasma polymerization, however a high degree ...
Allyl methacrylate (AMA) was deposited on aluminium using atmospheric dielectric barrier discharge p...
2,2,4,4,6,8,8-Heptamethylnonane (HMN), a saturated branched hydrocarbon precursor, is deposited by m...
The use of plasma technologies under atmospheric pressure for the surface modification of polymers a...