In this research, the stress state of the reinforcing SiC particles in a hybrid MMC is investigated by micro Raman spectroscopy. The experiment was carried out in situ in the Raman spectroscopy. Experimental results show that cracks due to monotonic loading propagates by the debonding of the particle/matrix interface and particle fracture. Moreover, secondary cracks form in front of the main crack tip coalesce with the main crack in subsequent loading and final failure occurs. A high decrease in stress (several hundred in MPa) is observed with the interfacial debonding at the interface and with the particle fracture on the particle. The critical tensile stresses for particle-matrix interface debonding and particle fracture develop in hybrid...
Micro-mechanical Raman spectroscopy is an excellent tool for direct stress measurements in the struc...
Raman spectroscopy was used to study the influence of the shear yield stress of the matrix on the st...
Two recent developments, experimental Micro-Raman spectroscopy (MRS) and theoretical quadratic influ...
In this research, the stress state of the reinforcing SiC particles in a hybrid MMC is investigated ...
The measurement of stress in the SiC particles during crack propagation was investigated by micro ra...
Residual stresses can be generated in composites under two conditions (1): (a) processing of the com...
The recent evolution of micro-Raman spectroscopy as micromechanical experimental technique had a pro...
An analytical framework for determination of scratch-induced residual stress within SiC grains of Zr...
An analytical framework for determination of scratch-induced residual stress within SiC grains of Zr...
The recent evolution of micro-Raman spectroscopy as micro-mechanical experimental technique had a pr...
Silicon–silicon carbide (Si–SiC) composites have emerged as a new class of materials with superior p...
Roman spectroscopy has been used to investigate the influence of fibre/matrix debonding on the stres...
Micro-mechanical Raman spectroscopy is an excellent tool for direct stress measurements in the struc...
Raman spectroscopy was used to study the influence of the shear yield stress of the matrix on the st...
Two recent developments, experimental Micro-Raman spectroscopy (MRS) and theoretical quadratic influ...
In this research, the stress state of the reinforcing SiC particles in a hybrid MMC is investigated ...
The measurement of stress in the SiC particles during crack propagation was investigated by micro ra...
Residual stresses can be generated in composites under two conditions (1): (a) processing of the com...
The recent evolution of micro-Raman spectroscopy as micromechanical experimental technique had a pro...
An analytical framework for determination of scratch-induced residual stress within SiC grains of Zr...
An analytical framework for determination of scratch-induced residual stress within SiC grains of Zr...
The recent evolution of micro-Raman spectroscopy as micro-mechanical experimental technique had a pr...
Silicon–silicon carbide (Si–SiC) composites have emerged as a new class of materials with superior p...
Roman spectroscopy has been used to investigate the influence of fibre/matrix debonding on the stres...
Micro-mechanical Raman spectroscopy is an excellent tool for direct stress measurements in the struc...
Raman spectroscopy was used to study the influence of the shear yield stress of the matrix on the st...
Two recent developments, experimental Micro-Raman spectroscopy (MRS) and theoretical quadratic influ...