Electromyograph (EMG) signal analysis to predict muscle fatigue during driving

Electromyography (EMG) signal obtained from muscles need advance methods for detection, processing and classification. The purpose of this paper is to analyze muscle fatigue from EMG signals. At beginning, 15 subjects will an-swer a set of questionnaires. The score of the questionnaires will be calculated and the score will determine if the driver is fatigue or mild fatigue or fatigue based on their driving habit. Next, EMG signals will be collected by placing two surface electrodes on the Brachioradialis muscle located at the forearm while driving Need For Speed (NFS) game. A simulation set of steering and pedals will be controlled during the driving game. The drivers drive for two hours and the EMG signal will be collected during they are driving. The output signals will be pre-process to remove any noise in the signal. After that, the data is normalized between value 0 to 1 and the signal is analyzed using frequency analysis and time analysis. Mean and variance will be calculated for time domain analysis and graph of mean vs variance is plotted. In frequency domain analysis, Power Spec-tral Density (PSD) is extracted from the peak frequency of PSD in each signal is obtained. All result will be divided into three classes: non-fatigue, mild-fatigue and fatigue. Based on result obtained in time domain, average normalized mean (non-fatigue: 0.5004), (mild-fatigue: 0.497) and (fatigue: 0.494). While, for fre-quency domain analysis, average peak frequency (non-fatigue: 13.379Hz), (mild-fatigue: 11.969Hz) and (fatigue: 12.782Hz)