Characterizing the effects of shaking intensity on the kinetics of metallic iron dissolution in EDTA.

Despite two decades of intensive laboratory investigations, several aspects of contaminant removal from aqueous solutions by elemental iron materials (e.g., in Fe(0)/H2O systems) are not really understood. One of the main reasons for this is the lack of a unified procedure for conducting batch removal experiments. This study gives a qualitative and semi-quantitative characterization of the effect of the mixing intensity on the oxidative dissolution of iron from two Fe(0)-materials (materials A and B) in a diluted aqueous ethylenediaminetetraacetic solution (2 mM EDTA). Material A (fillings) was a scrap iron and material B (spherical) a commercial material. The Fe(0)/H2O/EDTA systems were shaken on a rotational shaker at shaking intensities between 0 and 250 min(-1) and the time dependence evolution of the iron concentration was recorded. The systems were characterized by the initial iron dissolution rate (k(EDTA)). The results showed an increased rate of iron dissolution with increasing shaking intensity for both materials. The increased corrosion through shaking was also evidenced through the characterization of the effects of pre-shaking time on k(EDTA) from material A. Altogether, the results disprove the popular assumption that mixing batch experiments is a tool to limit or eliminate diffusion as dominant transport process of contaminant to the Fe(0) surface