Device for assembly and testing of automotive headlights

V okviru diplomskega dela je bilo potrebno izdelati napravo, ki postopek sestave reflektorja delno avtomatizira in hkrati preverja, ali so vsi sestavni elementi ustrezno nameščeni. Naprava izpolnjuje vse zahteve naročnika in zagotavlja ustrezno varnost pri delu. Model naprave in delavniške načrte smo izdelali v programskem paketu SolidWorks. Za izdelavo pnevmatske sheme smo uporabili Festov program za izdelavo pnevmatskih shem FluidDraw. Po končani izdelavi naprave smo določili zmogljivost naprave, ki je morala izpolnjevati časovne zahteve naročnika. Analizirali smo tudi delovanje naprave, ki se je izkazala za zelo uspešno, saj smo pri izdelavi testnih kosov dosegali odlične rezultate. Določili smo tudi stroške izdelave naprave in njeno prodajno ceno.In the course of the bachelor’s thesis, it was necessary to create a device that partially automates the process of the composition of the reflector and simultaneously verifies that all the components are properly installed. The device meets all the requirements of the customer and ensures adequate safety at work. The device model and drawings were created in the SolidWorks software package. To create a pneumatic scheme, we used the Festo program for producing pneumatic schemes FluidDraw. After the device was finished, we determined the capacity of the device, which had to meet the subscriber\u27s time requirements. We also analyzed the performance of the device, which proved to be very successful, as we achieved excellent results in the production of test pieces. We also determined the cost of manufacturing the device and its selling price