A three-dimensional finite element analysis of the human hip

This is the author accepted manuscript. The final version is available from Taylor & Francis (Routledge) via the DOI in this record.Athree-dimensional hip model was created from the MRI scans of one human subject based on constructing the entire pelvis and femur. The ball and socket joint was modelled between the hip’s acetabulum and the femoral head to analysethe multiaxial loads applied in the hip joint. The three key ligaments that reinforce the external surface of the hip to help to stabilisethe joint were also modelledwhich are the iliofemoral , the pubofemoral andischiofemoral ligaments. Each of these ligaments wraps around the joint connection to form a seal over the synovial membrane, a line of attachment around the head of the femur. This model was tested for different loading and boundary conditions to analysetheir sensitivitieson the cortical andcancellous tissues of the human hip bones. The outcomes of a one-legged stance finite element analysis revealed that the maximum of 0.056 mm displacement occurred. The stress distribution varied across the model which the majority occurring in the cortical femurand dissipating through the cartilage. The maximum stress value occurring in the joint was 110.1 MPa, which appeared at thefree end of the proximal femur.This developed finite element model was validated againstthe literature data to be used as anasset for further research in investigating new methods of total hip arthroplasty, to minimisethe recurrence of dislocations and discomfort in the hip joint, as well as increasing the range of movement available to a patient after surgery