Add to ORKGMicron-sized High Density Polyethylene (HDPE) particles were coated with ultrathin alumina (Al2O3) films in a Fluidized Bed Reactor (FBR) by Atomic Layer Deposition (ALD) at 77 ºC. Al2O3 films on the HDPE particles were confirmed by different methods. These particles were extruded conventionally with the ceramic shells mixing intimately in the polymer matrix. The successful dispersion of the Al2O3 shells in the polymer matrix following extrusion was confirmed using cross sectional Transmission Electron Microscopy (TEM)
Since the eighties, polymeric nanocomposites have been intensely investigated due to the performanc...
Surface modification for micro-nanoparticles at the atomic and close-to-atomic scale is of great imp...
The use of polymer nanocomposites (PNCs) for their unique properties has been around for over a cent...
An innovative process to uniformly incorporate dispersed nano-scale ceramic inclusions within a poly...
A new route to deposit alumina nanometric thin films on powders from the single source Aluminum Tri-...
There is strong demands to functionalize nanoparticles for many different industrial and scientific ...
Multi-layer ultrathin polymer films have been deposited on the surfaces of nanoparticles of alumina ...
cited By 4International audienceThe cold spray deposition of ultra-high molecular weight polyethylen...
Nanoparticles are increasingly applied in a range of fields, such as electronics, catalysis, energy ...
During the past decade, nanoparticles (1-100 nm) and nanocomposites have become the focus of many st...
Particles are widely used in the chemical industry as raw material and end product. In many applicat...
Atomic layer deposition (ALD) is a layer-by-layer deposition process based on repeated self-limiting...
Much research is being done to develop material combinations of polymer nanocomposites with tailored...
Nanopowders are applied in a wide range of processes, and their use continues to increase. Fluidizat...
Gas-phase polyolefin polymerization processes are executed in fluidized beds. The particles often ha...
Since the eighties, polymeric nanocomposites have been intensely investigated due to the performanc...
Surface modification for micro-nanoparticles at the atomic and close-to-atomic scale is of great imp...
The use of polymer nanocomposites (PNCs) for their unique properties has been around for over a cent...
An innovative process to uniformly incorporate dispersed nano-scale ceramic inclusions within a poly...
A new route to deposit alumina nanometric thin films on powders from the single source Aluminum Tri-...
There is strong demands to functionalize nanoparticles for many different industrial and scientific ...
Multi-layer ultrathin polymer films have been deposited on the surfaces of nanoparticles of alumina ...
cited By 4International audienceThe cold spray deposition of ultra-high molecular weight polyethylen...
Nanoparticles are increasingly applied in a range of fields, such as electronics, catalysis, energy ...
During the past decade, nanoparticles (1-100 nm) and nanocomposites have become the focus of many st...
Particles are widely used in the chemical industry as raw material and end product. In many applicat...
Atomic layer deposition (ALD) is a layer-by-layer deposition process based on repeated self-limiting...
Much research is being done to develop material combinations of polymer nanocomposites with tailored...
Nanopowders are applied in a wide range of processes, and their use continues to increase. Fluidizat...
Gas-phase polyolefin polymerization processes are executed in fluidized beds. The particles often ha...
Since the eighties, polymeric nanocomposites have been intensely investigated due to the performanc...
Surface modification for micro-nanoparticles at the atomic and close-to-atomic scale is of great imp...
The use of polymer nanocomposites (PNCs) for their unique properties has been around for over a cent...