To the goal of improving the early compressive strength of the mortar including Ground granulated blast furnace slag under low-temperature environment, Industrial byproducts including SiO2 and Al2O3 was fired and than 7% of it was added into Ground granulated blast furnace slag. By checking compressive strength and activity index from different mixing rate, in spite of low strength development than OPC 100%, when using firing powder, the expectation of increasing strength by curing time was affirmative.��� ��������� 2011������ ��������������� ������������������������(������������:11������������C06)��� ��������� ��������� ������ ��������� ������������
In the present study, the development of strength in different calcium aluminate cement (CAC) mixtur...
WOS: 000309493700014In this study, the effect of elevated temperature on the compressive strength of...
Blast furnace slag is recycled as high value-added material, while steel slag is difficult to recycl...
In this study Industrial byproducts that contain large amounts of SiO2 and Al2O3 was fired using moc...
Reaction degree of ground granulated blast furnace slag(GGBFS) in cement paste was measured by water...
The purpose of this study is to improve the early age compressive strength of concrete (1 age, 3 age...
In the field of construction, securing the early strength of concrete (on the first and third days o...
In this investigation 12 mortar mixes including three groups were prepared using binder contents 380...
Based on previous research and existing literature, this study examines the development of admixture...
Slag is a waste from steelmaking industries that was released into the environment. Slag was used as...
The study on the strength prediction using Maturity is mainly focused on, but the study on the concr...
In this study, the effects of slag replacement on abrasion resistance, flexural and compressive stre...
Blast furnace slag is recycled as high value-added material, while steel slag is difficult to recycl...
Abstract—We conducted a Design of Experiments to analyze and optimize the effect of the SiO2/K2O, H2...
In the experiment, we add to NaOH, Ca(OH)��� and Calcium Hydroxide as the Slag stimulus also mixed t...
In the present study, the development of strength in different calcium aluminate cement (CAC) mixtur...
WOS: 000309493700014In this study, the effect of elevated temperature on the compressive strength of...
Blast furnace slag is recycled as high value-added material, while steel slag is difficult to recycl...
In this study Industrial byproducts that contain large amounts of SiO2 and Al2O3 was fired using moc...
Reaction degree of ground granulated blast furnace slag(GGBFS) in cement paste was measured by water...
The purpose of this study is to improve the early age compressive strength of concrete (1 age, 3 age...
In the field of construction, securing the early strength of concrete (on the first and third days o...
In this investigation 12 mortar mixes including three groups were prepared using binder contents 380...
Based on previous research and existing literature, this study examines the development of admixture...
Slag is a waste from steelmaking industries that was released into the environment. Slag was used as...
The study on the strength prediction using Maturity is mainly focused on, but the study on the concr...
In this study, the effects of slag replacement on abrasion resistance, flexural and compressive stre...
Blast furnace slag is recycled as high value-added material, while steel slag is difficult to recycl...
Abstract—We conducted a Design of Experiments to analyze and optimize the effect of the SiO2/K2O, H2...
In the experiment, we add to NaOH, Ca(OH)��� and Calcium Hydroxide as the Slag stimulus also mixed t...
In the present study, the development of strength in different calcium aluminate cement (CAC) mixtur...
WOS: 000309493700014In this study, the effect of elevated temperature on the compressive strength of...
Blast furnace slag is recycled as high value-added material, while steel slag is difficult to recycl...