Initial wetting phenomena and spreading property of CaO-SiO2 slag on MgO single and poly-crystal refractory substrates are investigated using sessile drop technique and a high-speed camera (1 500 frame's). By observing and analyzing the spreading rate, change of the contact angle, and the composition change in slag and refractory, we found that the initial wetting is non-reactive and controlled by viscous friction.This work was supported by the R&D Center for Valuable Recycling (Global-Top Environmental Technology Development Program) funded by the Ministry of Environment (Project No. :11-C22-ID)
Metal droplets sticking to spinel solids, present in metallurgical slag systems, play an important r...
Metal droplets sticking to spinel solids, present in metallurgical slag systems, play an important r...
Various carbon contents in the MgO-C refractory were studied with respect to the oxidation resistanc...
The wetting of CaO-SiO2-MnO slag on silicon carbide was studied with a variety of slag compositions ...
The wettability of liquid slag from the CaO-SiO2-MgO-Al2O3 system on a solid Al2O3 substrate at 1773...
Dynamic wetting of CaO-Al2O3-SiO2-MgO liquid oxide on MgAl2O4 spinel Inclusion type and content in s...
The microstructure of the refractory material is closely related to its properties, and the wettabil...
Wetting experiments in two cases have been carried out to measure the wettability between molten sla...
A project studied wetting of iron, nickel and platinum by molten MnO-SiO2 (MS) and CaO-Al2O3-SiO2 (C...
Inclusion content minimization is key in the production high quality steels. This is typically achie...
Inclusion removal is key in the production of high quality steel. The inclusions are primarily remov...
Understanding and controlling inclusion removal from steel is critical in modern steelmaking. Inclus...
Inclusion content minimization is key in the production high quality steels. This is typically achie...
We investigated dynamic interfacial phenomena at the slag-metal-refractory three-phase interface usi...
Spreading of liquid drop on cold solid substrates followed by solidification involves heat transfer,...
Metal droplets sticking to spinel solids, present in metallurgical slag systems, play an important r...
Metal droplets sticking to spinel solids, present in metallurgical slag systems, play an important r...
Various carbon contents in the MgO-C refractory were studied with respect to the oxidation resistanc...
The wetting of CaO-SiO2-MnO slag on silicon carbide was studied with a variety of slag compositions ...
The wettability of liquid slag from the CaO-SiO2-MgO-Al2O3 system on a solid Al2O3 substrate at 1773...
Dynamic wetting of CaO-Al2O3-SiO2-MgO liquid oxide on MgAl2O4 spinel Inclusion type and content in s...
The microstructure of the refractory material is closely related to its properties, and the wettabil...
Wetting experiments in two cases have been carried out to measure the wettability between molten sla...
A project studied wetting of iron, nickel and platinum by molten MnO-SiO2 (MS) and CaO-Al2O3-SiO2 (C...
Inclusion content minimization is key in the production high quality steels. This is typically achie...
Inclusion removal is key in the production of high quality steel. The inclusions are primarily remov...
Understanding and controlling inclusion removal from steel is critical in modern steelmaking. Inclus...
Inclusion content minimization is key in the production high quality steels. This is typically achie...
We investigated dynamic interfacial phenomena at the slag-metal-refractory three-phase interface usi...
Spreading of liquid drop on cold solid substrates followed by solidification involves heat transfer,...
Metal droplets sticking to spinel solids, present in metallurgical slag systems, play an important r...
Metal droplets sticking to spinel solids, present in metallurgical slag systems, play an important r...
Various carbon contents in the MgO-C refractory were studied with respect to the oxidation resistanc...