Earthquake response analysis of RC bridges using simplified modeling approaches

In this paper, simplified modeling approaches describing the hysteretic behavior of reinforced concrete bridge piers are proposed. For this purpose, flexure-axial and shear-axial interaction models are developed and implemented into a nonlinear finite element analysis program. Comparative verifications for reinforced concrete columns prove that the analytical predictions obtained with the new formulations show good correlation with experimental results under various levels of axial forces and section types. In addition, analytical correlation studies for the inelastic earthquake response of reinforced concrete bridge structures are also carried out using the simplified modeling approaches. Relatively good agreement is observed in the results between the current modeling approach and the elaborated fiber models. It is thus encouraging that the present developments and approaches are capable of identifying the contribution of deformation mechanisms correctly. Subsequently, the present developments can be used as a simple yet effective tool for the deformation capacity evaluation of reinforced concrete columns in general and reinforced concrete bridge piers in particular. (C) 2009 Elsevier Ltd. All rights reserved.The work presented in this paper was funded by Center for Concrete Corea (05-CCT-D11), supported by Korea Institute of Construction and Transportation Technology Evaluation and Planning (KICTTEP) under the Ministry of Construction and Transportation (MOCT)