Algebraic observer-based output-feedback controller design for a PEM fuel cell air-supply subsystem

© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.In this paper, an algebraic-observer-based output-feedback controller is proposed for a Proton Exchange Membrane Fuel Cell (PEMFC) air-supply subsystem, based on both algebraic differentiation and sliding-mode control approaches. The goal of the design is to regulate the Oxygen Excess Ratio (OER) towards its optimal setpoint value in the PEMFC air-supply subsystem. Hence, an algebraic estimation approach is used to reconstruct the OER based on a robust differentiation method. The proposed observer is known by its finite-time convergence and low computational time compared to other observers presented in the literature. Then, a twisting controller is designed to control the OER by manipulating the compressor motor voltage. The parameters of the twisting controller have been calculated by means of an off-line tuning procedure. The performance of the proposed algebraic-observer-based output-feedback controller is analyzed through simulations for different stack-current changes, for parameter uncertainties and for noise rejection. Results show that the proposed approach properly estimates and regulates the OER in finite-time.Peer ReviewedPostprint (author's final draft