This paper presents theoretical and experimental results for a novel three-pole HTS lumped-element narrowband filter with central frequency 1.7775 GHz and 0.84% fractional bandwidth. A high degree of miniaturization is reached by the nse of planar coils as inductance elements. Good performance on YBCO devices has been achieved. (C) 2001 John Wiley & Sons, Inc
High-temperature superconductor (HTS) materials display extremely low loss in the superconducting st...
© 2018 IEEE. This paper presents a miniaturized quint-band high-temperature superconducting (HTS) ba...
In this paper, we show the design, the realization and the characterization of a 10 GHz superconduct...
This paper presents theoretical and experimental results for a novel three-pole HTS lumped-element n...
A high temperature superconductor (HTS) filter is designed and measured at 1.93 GHz, using microstri...
[出版社版]In this paper, two types of miniaturized high-temperature superconductor filters are described...
The increasing demand on microwave spectrum for communication systems has been the driving force in ...
A 5-pole lumped element bandpass filter(BPF)of center frequency 264.05MHz and fractional bandwidth(F...
In this paper we present methods for miniaturization of superconducting filters. We consider two des...
Supcrconducting planar filters exhibit higher selectivity, bigger out-of-band rejection and smaller ...
Superconducting filters using spiral resonators have been demonstrated. Compared with meander lines,...
Two types of miniaturized high-temperature superconducting filters are described in this paper. The ...
In this paper we report a simple tuning methodology of high temperature superconducting (HTS) micros...
A practical design methodology for a compact parallel-coupled microstrip bandpass filter structure w...
copyright(c)2005 IEICE 許諾番号:07RB0174 http://www.ieice.org/jpn/trans_online/index.htmlAt frequencies...
High-temperature superconductor (HTS) materials display extremely low loss in the superconducting st...
© 2018 IEEE. This paper presents a miniaturized quint-band high-temperature superconducting (HTS) ba...
In this paper, we show the design, the realization and the characterization of a 10 GHz superconduct...
This paper presents theoretical and experimental results for a novel three-pole HTS lumped-element n...
A high temperature superconductor (HTS) filter is designed and measured at 1.93 GHz, using microstri...
[出版社版]In this paper, two types of miniaturized high-temperature superconductor filters are described...
The increasing demand on microwave spectrum for communication systems has been the driving force in ...
A 5-pole lumped element bandpass filter(BPF)of center frequency 264.05MHz and fractional bandwidth(F...
In this paper we present methods for miniaturization of superconducting filters. We consider two des...
Supcrconducting planar filters exhibit higher selectivity, bigger out-of-band rejection and smaller ...
Superconducting filters using spiral resonators have been demonstrated. Compared with meander lines,...
Two types of miniaturized high-temperature superconducting filters are described in this paper. The ...
In this paper we report a simple tuning methodology of high temperature superconducting (HTS) micros...
A practical design methodology for a compact parallel-coupled microstrip bandpass filter structure w...
copyright(c)2005 IEICE 許諾番号:07RB0174 http://www.ieice.org/jpn/trans_online/index.htmlAt frequencies...
High-temperature superconductor (HTS) materials display extremely low loss in the superconducting st...
© 2018 IEEE. This paper presents a miniaturized quint-band high-temperature superconducting (HTS) ba...
In this paper, we show the design, the realization and the characterization of a 10 GHz superconduct...