The temperature dependence of the sputtering Ar pressure effects on magnetic properties and the coercivity mechanism of Co(2 Å)/Pd(13 Å) multilayers were studied as the sputtering Ar pressure varied from 3–15 mTorr and the temperature from 300 to 35 K. It is found that the roughness of the interfaces or film surface increases with increasing sputtering pressure, the anisotropy increases with decreasing temperature and increasing Ar pressure and shows a maximum at PAr≃12 mTorr, and the coercivity increases with Ar pressure and shows stronger temperature dependence at higher Ar pressure. The coercivity mechanism was analyzed in terms of the coercivity predicted by Kronmüller\u27s theory [Phys. Status Solidi B 144, 385 (1987)]. Wall pinning is...
Local environment effects are important for understanding interfacial magnetism in artificially stru...
Cobalt-based multilayer thin films such as Co/Pt and Co/Pd were prepared by magnetron sputtering and...
CoNi/Pt multilayers were prepared by magnetron sputtering using Ar gas. The effects of the Pt seed l...
The temperature dependence of the sputtering Ar pressure effects on magnetic properties and the coer...
A series of Co/Pd multilayers were made by dc magnetron sputter deposition on Al foil substrates. Fo...
A series of Co/Pd multilayers were made by dc magnetron sputter deposition on Al foil substrates. Fo...
We report on the temperature dependence of the magnetic properties and interface magnetism of Co/Pt ...
We report on the temperature dependence of the magnetic properties and interface magnetism of Co/Pt ...
Thin Co films were fabricated by DC magnetron sputtering. The effect of argon pressure on the micros...
Co/Pd multilayer thin films consisting of Co layers between 2-25 Å and Pd layers of typically 14 Å w...
Co/Cu and Co/Si multilayers of total thickness ~3000 Å were prepared by rf and dc magnetron sputteri...
Co/Pd multilayer thin films consisting of Co layers between 2-25,~, and Pd layers of typically 14 A ...
Local environment effects are important for understanding interfacial magnetism in artificially stru...
Abstract4oNi lPt multilayers were prepared by magnetron sputtering using Ar gas. Effects of Pt seedl...
Keskin V, Aktas B, Schmalhorst J-M, et al. Temperature and Co thickness dependent sign change of the...
Local environment effects are important for understanding interfacial magnetism in artificially stru...
Cobalt-based multilayer thin films such as Co/Pt and Co/Pd were prepared by magnetron sputtering and...
CoNi/Pt multilayers were prepared by magnetron sputtering using Ar gas. The effects of the Pt seed l...
The temperature dependence of the sputtering Ar pressure effects on magnetic properties and the coer...
A series of Co/Pd multilayers were made by dc magnetron sputter deposition on Al foil substrates. Fo...
A series of Co/Pd multilayers were made by dc magnetron sputter deposition on Al foil substrates. Fo...
We report on the temperature dependence of the magnetic properties and interface magnetism of Co/Pt ...
We report on the temperature dependence of the magnetic properties and interface magnetism of Co/Pt ...
Thin Co films were fabricated by DC magnetron sputtering. The effect of argon pressure on the micros...
Co/Pd multilayer thin films consisting of Co layers between 2-25 Å and Pd layers of typically 14 Å w...
Co/Cu and Co/Si multilayers of total thickness ~3000 Å were prepared by rf and dc magnetron sputteri...
Co/Pd multilayer thin films consisting of Co layers between 2-25,~, and Pd layers of typically 14 A ...
Local environment effects are important for understanding interfacial magnetism in artificially stru...
Abstract4oNi lPt multilayers were prepared by magnetron sputtering using Ar gas. Effects of Pt seedl...
Keskin V, Aktas B, Schmalhorst J-M, et al. Temperature and Co thickness dependent sign change of the...
Local environment effects are important for understanding interfacial magnetism in artificially stru...
Cobalt-based multilayer thin films such as Co/Pt and Co/Pd were prepared by magnetron sputtering and...
CoNi/Pt multilayers were prepared by magnetron sputtering using Ar gas. The effects of the Pt seed l...