Evaluating Four-Point Bend Fatigue of Asphalt Mix Using Image Analysis

One of the primary structural distress modes found in bituminous pavement layers is fatigue cracking, resulting from repeated application of traffic-induced stresses. The development of a four-point bending test arrangement to determine the dynamic mechanical properties of rectangular beam specimens (305×45×50mm dimensions) of bituminous mixtures is discussed. This novel system allows the crack-damaged surfaces of beam specimens to be inspected and monitored digitally in situ during fatigue tests. The test fixture, which was integrated with a closed-loop servo hydraulic feedback system, incorporates a constant clamping mechanism and uses a combined displacement and loading mode of control. A series of four-point bending fatigue tests were performed on specimens of two standard Irish mixtures: a hot rolled asphalt and dense base course macadam. The digitally imaged information on fatigue cracking was used to measure the extent of damage and to characterize a linear elastic fracture mechanics model.Deposited by bulk importAM