Add to ORKGThesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Metallurgy, 1952.Vita.Includes bibliographical references (leaves 160-162).by Hsing-Chien Chang.Sc.D
Sintered materials have been commercially available for many years, but only recently have they been...
The presented dissertation discusses an experimental and analytical investigation into the interacti...
The article of record as published may be found at http://dx.doi.org/10.1007/BF02586120Microstructur...
The majority of polycrystalline metals and alloys, when subjected to certain conditions of stress at...
Processing through the application of severe plastic deformation (SPD) is now an accepted procedure ...
This report covers phases of an investigation of the fundamentals of creep in metals. Results of a s...
Grain boundaries in high-purity (99.999%) aluminum with misorientations of 8°-15° have been studied ...
The creep behavior in pure aluminum has been investigated by helicoid spring creep tests at strain r...
High purity aluminum was processed by equal-channel angular pressing (ECAP) to reduce the grain size...
Various microstructural rate controlling models of creep are reviewed. They are compared to macrosco...
The creep of single crystals of high-purity aluminum was investigated in the range of temperatures f...
With the increasing use of aluminum in naval vessels and the ever-present danger of fires, it is imp...
Creep behavior of polycrystalline aluminum oxide and sodium chloride at high temperature
High-purity aluminum was processed by equal-channel angular pressing (ECAP) and then tested under cr...
Creep tests were conducted in compression to evaluate the flow behavior of aluminum at very high tem...
Sintered materials have been commercially available for many years, but only recently have they been...
The presented dissertation discusses an experimental and analytical investigation into the interacti...
The article of record as published may be found at http://dx.doi.org/10.1007/BF02586120Microstructur...
The majority of polycrystalline metals and alloys, when subjected to certain conditions of stress at...
Processing through the application of severe plastic deformation (SPD) is now an accepted procedure ...
This report covers phases of an investigation of the fundamentals of creep in metals. Results of a s...
Grain boundaries in high-purity (99.999%) aluminum with misorientations of 8°-15° have been studied ...
The creep behavior in pure aluminum has been investigated by helicoid spring creep tests at strain r...
High purity aluminum was processed by equal-channel angular pressing (ECAP) to reduce the grain size...
Various microstructural rate controlling models of creep are reviewed. They are compared to macrosco...
The creep of single crystals of high-purity aluminum was investigated in the range of temperatures f...
With the increasing use of aluminum in naval vessels and the ever-present danger of fires, it is imp...
Creep behavior of polycrystalline aluminum oxide and sodium chloride at high temperature
High-purity aluminum was processed by equal-channel angular pressing (ECAP) and then tested under cr...
Creep tests were conducted in compression to evaluate the flow behavior of aluminum at very high tem...
Sintered materials have been commercially available for many years, but only recently have they been...
The presented dissertation discusses an experimental and analytical investigation into the interacti...
The article of record as published may be found at http://dx.doi.org/10.1007/BF02586120Microstructur...