A compact differential 4-way power combiner with 2.3 dB loss and high common-mode rejection characteristic for use in mm-wave PAs is presented. A complete circuit comprised of a power splitter, two-stage cascode PA array, and a power combiner was implemented in SiGe technology. Measured small-signal gain of at least 17 dB was obtained from 74.5 GHz to 80.5 GHz with a peak 21 dB at 79 GHz. The prototype delivered 13.2 dBm P1dB and 14.3 dBm Psat when operated from a single 3.3 V supply at 75 GHz
With the rapid advancements of the military and commercial communications systems, the demands for h...
This paper demonstrates a 1-Watt output power amplifier MMIC operating from 13.5GHz to 14.5GHz (Ku-b...
Emerging millimeter-wave applications, including high speed wireless communication using 5G standard...
A 6-stage, 8-way combining power amplifier (PA) in a 130 nm SiGe BiCMOS technology is designed and m...
This paper presents an architecture for a SiGe E-band power amplifier using a stacked transformers f...
The design and layout of a two stage SiGe E-band power amplifier using a stacked transformer for out...
This thesis first presents a fully-integrated 16-way power combining amplifier for 67-92 GHz applica...
IEEE A 60 GHz fully-integrated 8-way combined power amplifier (PA) is developed in a standard 0.18 &...
International audienceA 60 GHz highly linear Power Amplifier (PA) is implemented in 65-nm Low Power ...
We present a widehand watt-level power amplifier (PA) for the K a-band designed and implemented in t...
A 28 GHz power amplifier (PA) using CMOS 0.18 μm Silterra process technology for milimeter wave appl...
The continued growth of data traffic in wireless communication applications demands to launch next-g...
International audienceThis paper presents the performance of a wideband 0.13μm BiCMOS SiGe power amp...
International audienceThis paper describes the techniques to design a SiGe power amplifier (PA) for ...
Millimeter‐wave (Mm‐Wave) communication have been considered as one of the most potential candidate ...
With the rapid advancements of the military and commercial communications systems, the demands for h...
This paper demonstrates a 1-Watt output power amplifier MMIC operating from 13.5GHz to 14.5GHz (Ku-b...
Emerging millimeter-wave applications, including high speed wireless communication using 5G standard...
A 6-stage, 8-way combining power amplifier (PA) in a 130 nm SiGe BiCMOS technology is designed and m...
This paper presents an architecture for a SiGe E-band power amplifier using a stacked transformers f...
The design and layout of a two stage SiGe E-band power amplifier using a stacked transformer for out...
This thesis first presents a fully-integrated 16-way power combining amplifier for 67-92 GHz applica...
IEEE A 60 GHz fully-integrated 8-way combined power amplifier (PA) is developed in a standard 0.18 &...
International audienceA 60 GHz highly linear Power Amplifier (PA) is implemented in 65-nm Low Power ...
We present a widehand watt-level power amplifier (PA) for the K a-band designed and implemented in t...
A 28 GHz power amplifier (PA) using CMOS 0.18 μm Silterra process technology for milimeter wave appl...
The continued growth of data traffic in wireless communication applications demands to launch next-g...
International audienceThis paper presents the performance of a wideband 0.13μm BiCMOS SiGe power amp...
International audienceThis paper describes the techniques to design a SiGe power amplifier (PA) for ...
Millimeter‐wave (Mm‐Wave) communication have been considered as one of the most potential candidate ...
With the rapid advancements of the military and commercial communications systems, the demands for h...
This paper demonstrates a 1-Watt output power amplifier MMIC operating from 13.5GHz to 14.5GHz (Ku-b...
Emerging millimeter-wave applications, including high speed wireless communication using 5G standard...